Department of Mechanical and Production Engineering (MPE)

Islamic University of Technology (IUT)

Department of Mechanical and Production Engineering (MPE)

Publications

2025 (22)

Dr. Mohammad Monjurul Ehsan

Md Maruf Ahmed, M Monjurul Ehsan, “Design and performance Assessment of Straight, Zigzag, and airfoil fin configurations in 100 kW supercritical CO2 PCHE for enhanced Pre-Cooler application”, Energy Conversion and Management X (2025) 101248 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525003800

Dr. Mohammad Monjurul Ehsan

Azmain Rashid Raiyan, Sami Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Energy, exergy, exergoeconomic (3E) analyses and ANN-based multi-objective optimization of novel vortex tube and turbo-expander enhanced transcritical CO2 cogeneration cycles”, Energy Conversion and Management 345 (2025) 120385 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890425009094

Dr. Mohammad Monjurul Ehsan

Azmain Rashid Raiyan, M Muhtasim Uzzaman, M Monjurul Ehsan, Yasin Khan, “Exergoeconomic assessment of a novel ejector recompression absorption cycle integrated with flash tank enhanced compression refrigeration cycle: ANN assisted genetic algorithm optimization”, Energy Conversion and Management X (2025) 101208 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452500340X

Mohammad Muhtasim Mashfy

Tarif Shahriar, Mohammad Muhtasim Mashfy, "Exploring Biogas Production from Fallen Leaves through Co- Digestion Methods," IUT JOURNAL OF ENGINEERING AND TECHNOLOGY (JET), Special issue (IUT-ICCET), Vol. 19 No. 3 (2025), Page-959-967. https://jet.iutoic-dhaka.edu/index.php/jet

Fahmida Tabassum Bristy

Exploring the barriers to decarbonizing the transportation system: A pathway to a cleaner future in emerging economies

Dr. Mohammad Monjurul Ehsan

Imrul Kayes, Mahdi Hafiz Nabil, M. Monjurul Ehsan, M. Ahsan Habib, Yasin Khan, “Advanced exergy analysis and machine learning based multi-objective optimization of a modified triple cascade refrigeration system for enhanced performance”, Applied Thermal Engineering (2025) 126661. Impact factor-6.1, Cite Score-11.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S1359431125012530

Dr. Mohammad Monjurul Ehsan

Azmain Rashid Raiyan, Samiuzzaman, Yasin Khan, M Monjurul Ehsan, Md Rezwanul Karim, Sefat Mahmud Siddique, “Exergoeconomic Analysis and Multi Objective Optimization of a Nuclear Driven Integrated Cooling and Power Cycle using Response Surface Regression Modeling Coupled with Genetic Algorithm”, Energy Conversion and Management 337 (2025) 119836 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890425003590

Dr. Mohammad Monjurul Ehsan

Shakhawat Hossain Sarker, Md Sameeul Amin, Nurul Abrar, M. Monjurul Ehsan, Yasin Khan, “Sustainable Solar Dish Based CSP-Fossil Operated Hybrid Power Plant with Thermal Energy Storage Utilizing Triple Extraction Steam and Organic Rankine Cycles”, Energy Conversion and Management X (2025) 101084 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525002168

Mahdi Hafiz Nabil

I. Kayes, M. H. Nabil, M. M. Ehsan, M. A. Habib, and Y. Khan, “Advanced exergy analysis and machine learning based multi-objective optimization of a modified triple cascade refrigeration system for enhanced performance,” Appl Therm Eng, vol. 274, p. 126661, Sep. 2025, doi: 10.1016/j.applthermaleng.2025.126661.

Mohammad Muhtasim Mashfy

Fatima Tasneem Mohsin , Nazmul Hossain , Tamzeed Ahmed Alvy , Tasnuva Sharmin , Md Azazul Haque, Mohammad Muhtasim Mashfy , Mohammed Mousa , Mohammad Nasim “Exploring the limitations and unlocking the potential of sodium-ion battery cathodes”, Materials Today Energy, Volume 50, June 2025, 101868. Cite Score-15.1, Impact factor- 9 SJR rank-Q-1 https://doi.org/10.1016/j.mtener.2025.101868 https://www.sciencedirect.com/science/article/pii/S2468606925000760#da0010

Prof. Dr. Md. Rezwanul Karim

RA Rinik, AA Bhuiyan, MR Karim, Enhancement of heat transfer using elliptical twisted inner pipe with convergent conical ring turbulator for turbulent flow in double pipe heat exchanger, International Journal of Thermal Sciences, Volume 210, April 2025, Ref. 109558, https://doi.org/10.1016/j.ijthermalsci.2024.109558 (Impact Factor: 4.9, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Mohammad Monjurul Ehsan

Tausif Elahi Khan, Sakibul Haque Sakib, Nazmus Sakib, Tanvir Hossain, M Monjurul Ehsan, Yasin Khan, “Multi-Objective Optimization of a Cascaded Supercritical CO2 Brayton Cycle with Ejector-Enhanced Transcritical CO2 and Flash Tank Absorption Refrigeration Cycles” Energy Conversion and Management X (2025) 100988 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525001205

Dr. Mohammad Nasim

F. T. Mohsin, N. Hossain, T. A. Alvy, T. Sharmin, M. A. Haque, M. M. Mashfy, M. Mousa, M. Nasim, Exploring the Limitations and Unlocking the Potential of Sodium-Ion Battery Cathodes, Materials Today Energy, 101868 (2025). doi.org/10.1016/j.mtener.2025.101868.

Dr. Mohammad Monjurul Ehsan

Md Maruf Ahmed, Salim Sadman Bishal, M Monjurul Ehsan, Yasin Khan, “Multi-effect distillation with novel liquid vapor ejector utilizing the waste heat from intercoolers of a single mixed refrigerant cycle for natural gas liquefaction”, Cleaner Energy Systems, Volume 10, June 2025, 100182, Cite Score-3.1. https://www.sciencedirect.com/science/article/pii/S2772783125000147

Yasin Khan

Md Maruf Ahmed, Salim Sadman Bishal, M Monjurul Ehsan, Yasin Khan, “Multi-effect distillation with novel liquid vapor ejector utilizing the waste heat from intercoolers of a single mixed refrigerant cycle for natural gas liquefaction”, Cleaner Energy Systems, Volume 10, June 2025, 100182, Cite Score-3.1. https://www.sciencedirect.com/science/article/pii/S2772783125000147

Yasin Khan

Sefat Mahmud Siddique, M. Muhtasim Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Thermal analysis of a novel configuration of double effect absorption system cascaded with ejector and injection enhanced compression refrigeration cycle”, Energy Conversion and Management 326 (2025) 119435 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890424013761

Md.Hasibur Rahman Hamim

Hamim, H. R., Hasan, T., Shahriar, F., Chowdhury, S. R., Rahman, Md. A., Nasim, M., & Habib, M. A. (2025). Basalt-silk fiber reinforced PLA composites: Effect of graphene fillers and stacking sequence. In Composites Part C: Open Access (Vol. 16, p. 100564). Elsevier BV. https://doi.org/10.1016/j.jcomc.2025.100564

Dr. Mohammad Nasim

H. R. Hamim, T. Hasan, F. Shahriar, S. R. Chowdhury, M. A. Rahman, M. Nasim, M. A. Habib, Basalt-Silk Fiber Reinforced PLA Composites: Effect of Graphene Fillers and Stacking Sequence, Composites Part C: Open Access, 16: 100564 (2025). doi.org/10.1016/j.jcomc.2025.100564

Mr. Chowdhury Sadid Alam

Chowdhury Sadid Alam, Vahid Karami, M. Shafiqur Rahman, 2024, “Thermo-Mechanical Response of High-Entropy Aluminum Alloy in the Additive Friction Stir Deposition Process”, Additive Manufacturing Letters, January 2025, 12, p. 100263

Dr. Mohammad Monjurul Ehsan

Sefat Mahmud Siddique, M. Muhtasim Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Thermal analysis of a novel configuration of double effect absorption system cascaded with ejector and injection enhanced compression refrigeration cycle”, Energy Conversion and Management 326 (2025) 119435 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890424013761

Dr. Mohammad Monjurul Ehsan

Tausif Elahi Khan, Masruf Zaman, M Monjurul Ehsan, Yasin Khan, “Thermal analysis of a main compression intercooling supercritical CO2 cycle cascaded with flash tank enhanced compression-absorption refrigeration cycle”, Energy Conversion and Management X (2025) 100868 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174524003465

Yasin Khan

Tausif Elahi Khan, Masruf Zaman, M Monjurul Ehsan, Yasin Khan, “Thermal analysis of a main compression intercooling supercritical CO2 cycle cascaded with flash tank enhanced compression-absorption refrigeration cycle”, Energy Conversion and Management X (2025) 100868 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174524003465

2024 (58)

Dr. Madihah Binti Haji Maharof

M Maharof, Z Jamaludin, S Mohammad, A Rashid, S Ahmed, L Abdullah, 2024. Super Twisting Sliding Mode Controller For Precise Ball Screw Driven XY Positioning Milling Table. Journal of Advanced Manufacturing Technology (JAMT) 18 (3).

Mohammad Muhtasim Mashfy

Tasnuva Sharmin, Nazmul Hossain, Fatima Tasneem Mohsin, Md Azazul Haque, Mohammad Muhtasim Mashfy, Tamzeed Ahmed Alvy,Mohammad Nasim, “Advancements in cutting-edge materials for sodium-ion battery anodes: A comprehensive review”, Materials Today Chemistry,Volume 42, December 2024, 102407. Cite Score-8.8, Impact factor- 6.7 SJR rank-Q-1 https://doi.org/10.1016/j.mtchem.2024.102407 https://www.sciencedirect.com/science/article/pii/S2468519424005135?via%3Dihub

Prof. Dr. Md. Rezwanul Karim

MS Hossain, MAI Rahat, MSH Khan, S Shajid, S Salehin, MR Karim, Techno-economic assessment of various concentrating solar power (CSP) technologies for large-scale sustainable power generation in Bangladesh, Energy Conversion and Management, Volume 321, 2024, Ref. 119079, https://doi.org/10.1016/j.enconman.2024.119079 (Impact Factor: 9.9, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Prof. Dr. Md. Rezwanul Karim

M Kamruzzaman, DK Bhattacharjya, E Alam, MR Karim, B Nath, KS Hattawi, MK Islam, Thermochemical and physical characterization of agricultural biomass for sustainable energy in Bangladesh, Energy Reports, Volume 12, 2024, Pages 5758-5768, https://doi.org/10.1016/j.egyr.2024.11.059 (Impact Factor: 4.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Mohammad Nasim

T. Sharmin, N. Hossain, F. T. Mohsin, M. A. Haque, M. M. Mashfy, T. A. Alvy, M. Nasim, Advancements in cutting-edge materials for sodium-ion battery anodes: A comprehensive review, Materials Today Chemistry, 42: 102407 (2024). doi.org/10.1016/j.mtchem.2024.102407

Mr. Chowdhury Sadid Alam

Ahmed, RU, Nabi, I, Alam, CS, Chen, Y, & Rahman, MS. "A Framework for Surface Scanning to Additive Repairing Using Point Cloud Data and Surface Reconstruction Algorithms." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A006. ASME.

Mr. Chowdhury Sadid Alam

Alam, CS, Abid, A, Ahmed, RU, & Rahman, MS. "Fracture Analysis of Additive Friction-Stir Deposited Non-Ferrous and Ferrous Alloys." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A027. ASME.

Mr. Chowdhury Sadid Alam

Abid, A, Sharifi, H, Alam, CS, Ahmed, RU, Sarker, P, Wick, C, & Rahman, MS. "Flexural and Tensile Properties of Cu-Ni-Cr Alloy Processed by Solid-State Additive Manufacturing." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A028. ASME.

Mr. Chowdhury Sadid Alam

Ahmed, RU, Dowell, E, Alam, CS, & Rahman, MS. "Design and Development of a Desktop 3D Printer for Conformal Additive Manufacturing." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A020. ASME.

Dr. Mohammad Nasim

In-depth Analysis of Motorcycle Accidents in Bangladesh: Understanding Injury Patterns in a Low- to Middle-Income Country, Late-breaking oral only presentation, AAAM’s 68th Annual Scientific Conference, 2024, Seoul, South Korea.

Sharmin Akter Urmee

Urmee, S.A. and Hossain, M. (2024), A Quantified Analysis of Lean First Then Automate for a Synergetic Effect. Engineering Reports e13047. Available at: https://doi.org/10.1002/eng2.13047

Dr. Mohammad Monjurul Ehsan

Foyez Ahmad,Fardin Mahatab,Sajjad Mahmud, Monjurul Ehsan, “Comprehensive Analysis of a Hybrid Solar Assisted Supercritical CO2 Reheat Recompression Brayton Cycle for Enhanced Performance”. International Journal of Thermofluids (2024) 100926 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724003665

Dr. Madihah Binti Haji Maharof

RA Hamid, SH Husni, T Ito, S Maidin, M Maharof, 2024. Effect of Filament Pre-Drying on the Microstructure and Porosity of 3D Printed PLA. Journal of Advanced Research in Micro and Nano Engineering 24 (1), 85-94.

Prof. Dr. Md. Rezwanul Karim

Aziz, M., Islam, M.A., Karim, M.R. et al. Effect of triangular pits on the mechanical behavior of 2D MoTe2: a molecular dynamics study. Journal of Molecular Modelling, Vol. 30, Article. 391 (2024). https://doi.org/10.1007/s00894-024-06180-z, (Impact Factor: 2.1, Springer, Q2 Ranked, ISI/Scopus Indexed Journal)

Dr. Mohammad Nasim

M. Nasim, S. Spadoni, P. G. Pavan, V. Brasco, U. Galvanetto, Helmets with lattice liners can mitigate traumatic brain injury from impacts, Journal of Biomechanics; 176: 112362 (2024). doi.org/10.1016/j.jbiomech.2024.112362

Dr. Md. Anayet Ullah Patwari

Kasim, M. S., Yusof, S. N. A., Mat Rasul, R., Awang, R., Abd Rahman, Z., Mohamed, S. B., Sahroni, T. R., & Patwari, M. A. U. (2024). Design and Optimization of LPG Safety Cap using Finite Element Method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 191–199. https://doi.org/10.37934/araset.54.2.191199

Muhammad Mahmood Hasan

Hossain, M. Naem, Muhammad Mahmood Hasan, M. Ahsan Habib, Fatin Bin Ferdous, and Sazid Rahman. "Assessing economic viability and environmental impact of solar-powered EV charging station in Gazipur, Bangladesh: A case study." Solar Compass 12 (2024): 100091, CiteScore - 5.7, SJR Rank - Q2.

Dr. Mohammad Nasim

J. Tasnim, M. Nasim, K.A. Aftab, F. Aktar, M. Hossain, Comparison of motorcycle accident data between low- or middle-income and high-income countries, IRCOBI conference, 2024, Stockholm, Sweden.

Dr. Md. Anayet Ullah Patwari

Khandaker Nomana, Usman Alib, Yongbo Lib, Shun Wangb, Anayet U. Patwari, Anil Kumard, ‘A novel nonlinear dynamic measure for early detection of bearing fault using weighted squared envelope based symbolic Lempel-Ziv complexity”- IEEE Transactions on Instrumentation and Measurement PP(99):1-1, DOI: 10.1109/TIM.2024.3463030

Yasin Khan

Rizvi Arefin Rinik, Naimul Islam, M Monjurul Ehsan, Yasin Khan, “Design of Gravity Assisted Heat Exchanger and its Application on Enhanced Waste Heat Recuperation Utilizing Organic Rankine and LNG System” International Journal of Thermofluids (2024) 100822 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724002635

Dr. Mohammad Monjurul Ehsan

Rizvi Arefin Rinik, Naimul Islam, M Monjurul Ehsan, Yasin Khan, “Design of Gravity Assisted Heat Exchanger and its Application on Enhanced Waste Heat Recuperation Utilizing Organic Rankine and LNG System” International Journal of Thermofluids (2024) 100822 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724002635

Mr. Chowdhury Sadid Alam

M. Shafiqur Rahman, Chowdhury Sadid Alam, M.K.H. Pulok, Congyuan Zeng, Uttam K. Chakravarty, 2024, “An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers”, ASME Journal of Engineering Materials and Technology, January 2025, 147(1), p. 011001.

Dr. Mohammad Monjurul Ehsan

Fairooz Nanzeeba, Tajwar A. Baigh, Afrida Kabir, Yasin Khan, M. Monjurul Ehsan, “Genetic Algorithm-based Optimization of Combined Supercritical CO2 Power and Flash-Tank Enhanced Transcritical CO2 Refrigeration Cycle for Shipboard Waste Heat Recuperation”, Energy Reports, Elsevier (2024) Impact factor-4.7, Cite Score-8.2, SJR rank-Q-2 https://www.sciencedirect.com/science/article/pii/S2352484724004840

Dr. Mohammad Monjurul Ehsan

Tajwar A. Baigh, Mostofa J. Saif, Ashraf Mustakim, Fairooz Nanzeeba, Yasin Khan, M. Monjurul Ehsan, “Enhancing Thermodynamic Performance with an Advanced Combined Power and Refrigeration cycle with Dual LNG Cold Energy Utilization” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024117793

Yasin Khan

Fairooz Nanzeeba, Tajwar A. Baigh, Afrida Kabir, Yasin Khan, M. Monjurul Ehsan, “Genetic Algorithm-based Optimization of Combined Supercritical CO2 Power and Flash-Tank Enhanced Transcritical CO2 Refrigeration Cycle for Shipboard Waste Heat Recuperation”, Energy Reports, Elsevier (2024) Impact factor-4.7, Cite Score-8.2, SJR rank-Q-2 https://www.sciencedirect.com/science/article/pii/S2352484724004840

Dr. Mohammad Monjurul Ehsan

Yasin Khan, S M Naqib Ul Islam, M Monjurul Ehsan, “Performance Evaluation of Novel Advanced Recompression Absorption Refrigeration Systems Equipped with Ejector and Vapor Injection Technology”, (2023): 102773. Impact factor-5.1, Cite Score-7.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2451904924003913

Fahim Tanfeez

Md.N. Mia, M. Abdullah, A. Das, F.T. Mahmood, M.N. Hasan, Mixed convective heat transfer in a square cavity filled with power-law fluids under active flow modulation, Heat Transfer n/a (2024). https://doi.org/https://doi.org/10.1002/htj.23143.

Yasin Khan

Tajwar A. Baigh, Mostofa J. Saif, Ashraf Mustakim, Fairooz Nanzeeba, Yasin Khan, M. Monjurul Ehsan, “Enhancing Thermodynamic Performance with an Advanced Combined Power and Refrigeration cycle with Dual LNG Cold Energy Utilization” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024117793

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, Shah Alam Bhuiyan “Improvement of drilled holes quality by voice-activated ultrasonic vibration assisted drilling process of different orientation” Published under licence by IOP Publishing Journal of Physics: Conference Series, Volume 2762, The International Symposium on Structural Dynamics of Aerospace 09/09/2023 - 10/09/2023 Xi'an, China Citation Anayet U Patwari et al 2024 J. Phys.: Conf. Ser. 2762 012027 DOI 10.1088/1742-6596/2762/1/012027

Dr. Md. Anayet Ullah Patwari

Shah Alam Bhuiyan, Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, “Development of a mathematical model for the prediction of drill quality in voice-activated ultrasonic vibration assisted drilling process” Journal of Physics: Conference Series, Volume 2762, The International Symposium on Structural Dynamics of Aerospace 09/09/2023 - 10/09/2023 Xi'an, China Citation Shah Alam Bhuiyan et al 2024 J. Phys.: Conf. Ser. 2762 012043 DOI 10.1088/1742-6596/2762/1/012043

Prof. Dr. Md. Rezwanul Karim

Nuhash, Mashrur Muntasir; Firoz, Mahmudul; Bhuiyan, Arafat Ahmed; Karim, Md. Rezwanul; Numerical Analysis of Extended Annular Jet Impingement for Sustainable Solar Air Heater (June 9, 2024). Available at SSRN: https://ssrn.com/abstract=4858854 or http://dx.doi.org/10.2139/ssrn.4858854

Yasin Khan

Yasin Khan, S M Naqib Ul Islam, M Monjurul Ehsan, “Performance Evaluation of Novel Advanced Recompression Absorption Refrigeration Systems Equipped with Ejector and Vapor Injection Technology”, (2023): 102773. Impact factor-5.1, Cite Score-7.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2451904924003913

Dr. Mohammad Monjurul Ehsan

Imrul Kayes, Raditun E. Ratul, Abyaz Abid, Fawaz Bukht Majmader, Yasin Khan, M Monjurul Ehsan. “Multi-Objective Optimization and 4E (Energy, Exergy, Economy, Environmental Impact) Analysis of a Triple Cascade Refrigeration System”. Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024076862

Muhammad Mahmood Hasan

Khaled, Md Mainuddin, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M. Monjurul Ehsan, Yasin Khan, and Muhammad Mahmood Hasan. "Thermal analysis and dynamic attributes of a sustainable CSP-fossil hybrid power plant utilizing organic Rankine cycles for enhanced plant performance." International Journal of Thermofluids 22 (2024): 100696. https://doi.org/10.1016/j.ijft.2024.100696, CiteScore - 10.1, SJR Rank - Q1.

Fahim Tanfeez

F.T. Mahmood, T.S. Chowdhury, M.N. Hasan, Fluid-structure interaction induced mixed convection characteristics in a lid-driven square cavity with non-Newtonian power law fluids, International Jour- nal of Thermofluids 22 (2024) 100687. https://doi.org/https://doi.org/10.1016/j.ijft.2024.100687.

Dr. Mohammad Monjurul Ehsan

Md Mainuddin Khaled, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan. “Thermal Analysis and Dynamic Attributes of a Sustainable CSP-Fossil Hybrid Power Plant Utilizing Organic Rankine Cycles for Enhanced Plant Performance”. International Journal of Thermofluids (2024) 100696 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724001381

Fahim Tanfeez

M.S. Nahin, M.S.U. Qaum, A.S. Chowdhury, T.I. Siam, F.T. Mahmood, M.N. Hasan, Mixed con- vection characteristics in a long horizontal lid-driven channel with periodically distributed local flow modulators, Heat Transfer (2024). https://doi.org/https://doi.org/10.1002/htj.23071.

Dr. Mohammad Monjurul Ehsan

Asif Iqbal Turja, Ishtiak Ahmed Khan, Sabbir Rahman, Ashraf Mustakim, Mohammad Ishraq Hossain, M Monjurul Ehsan, Yasin Khan. “Machine Learning-Based Multi-Objective Optimization and Thermal Assessment of Supercritical CO2 Rankine Cycles for Gas Turbine Waste Heat Recovery” Energy and AI 15 (2024) 100372 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546824000387

Dr. Mohammad Monjurul Ehsan

Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Thermal-hydraulic performance and flow phenomenon evaluation of a curved trapezoidal corrugated channel with E-shaped baffles implementing hybrid nanofluid” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.cell.com/action/showPdf?pii=S2405-8440%2824%2904729-7

Yasin Khan

Imrul Kayes, Raditun E. Ratul, Abyaz Abid, Fawaz Bukht Majmader, Yasin Khan, M Monjurul Ehsan. “Multi-Objective Optimization and 4E (Energy, Exergy, Economy, Environmental Impact) Analysis of a Triple Cascade Refrigeration System”. Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024076862

Dr. Md. Abu Shaid Sujon

Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study Journal: Composites Science and Technology, Volume 251, 2024 DOI: https://doi.org/10.1016/j.compscitech.2024.110578 Details: ISSN: 0266-3538

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Arman Hossain, Irteza Maroof, Fahim Mahmud,” An Innovative approach at assess the potentiality of using activated carbon and rice husk ash in primary cells, Malaysian Journal of Composite Science and Manufacturing, Volume 13, Issue 1, March 2024, pp55,66. doi.org: 10.37934/mjcsm.13.1.5567

Dr. Mohammad Monjurul Ehsan

S M Naqib Ul Islam, Ashraf Mustakim, Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Advanced Thermo-Hydraulic Assessment of Helical Pipes with Different Shapes of Jackets Using Single-Phase and Hybrid Nanofluids” International Journal of Thermofluids (2024) 100628 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000703

Yasin Khan

Yasin Khan, S M Naqib-Ul-Islam, Md Walid Faruque, M Monjurul Ehsan, “Advanced Cascaded Recompression Absorption System Equipped with Ejector and Vapor-Injection Enhanced Vapor Compression Refrigeration System: ANN Based Multi-Objective Optimization” Thermal Science and Engineering Progress (March 2024): 102485. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904924001033

Yasin Khan

Md Mainuddin Khaled, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan. “Thermal Analysis and Dynamic Attributes of a Sustainable CSP-Fossil Hybrid Power Plant Utilizing Organic Rankine Cycles for Enhanced Plant Performance”. International Journal of Thermofluids (2024) 100696 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724001381

Prof. Dr. Md. Rezwanul Karim

ASM Redwan Haider, Ahmad Fatehi Ali Mohammed Hezam, Md Akibul Islam, Yeasir Arafat, Mohammad Tanvirul Ferdaous, Sayedus Salehin, Md Rezwanul Karim, Temperature-dependent failure of atomically thin MoTe2, Journal of Molecular Modeling (2024), Vol. 30, Issue 2, Page 86, https://doi.org/10.1007/s00894-024-05883-7, (Impact Factor: 2.1, Springer, Q2 Ranked, Scopus Indexed Journal)

Muhammad Mahmood Hasan

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (2024) 100550 https://doi.org/10.1016/j.ecmx.2024.100550, CiteScore - 8.8, Impact Factor - 7.1, SJR rank - Q1.

Yasin Khan

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (February, 2024) 100550 Impact Factor-6.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452400028X

Dr. Mohammad Monjurul Ehsan

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (2024) 100550 Impact Factor-6.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452400028X

Dr. Mohammad Monjurul Ehsan

Yasin Khan, S M Naqib-Ul-Islam, Md Walid Faruque, M Monjurul Ehsan, “Advanced Cascaded Recompression Absorption System Equipped with Ejector and Vapor-Injection Enhanced Vapor Compression Refrigeration System: ANN Based Multi-Objective Optimization” Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1

Mr. Chowdhury Sadid Alam

Radif Uddin Ahmed, Chowdhury Sadid Alam, M Shafiqur Rahman, 2023, “Application of Machine Learning in Process Analysis of the Friction-Stir Welding Technique”, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, New Orleans, USA, Oct 29-Nov 2, 2023.

Yasin Khan

Asif Iqbal Turja, Ishtiak Ahmed Khan, Sabbir Rahman, Ashraf Mustakim, Mohammad Ishraq Hossain, M Monjurul Ehsan, Yasin Khan. “Machine Learning-Based Multi-Objective Optimization and Thermal Assessment of Supercritical CO2 Rankine Cycles for Gas Turbine Waste Heat Recovery” Energy and AI 15 (2024) 100372 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546824000387

Prof. Dr. Md. Rezwanul Karim

MM Nuhash, MR Karim, AA Bhuiyan, The impact of tube bundle layout on the thermal and fluidic behaviour of liquid lead–bismuth eutectic in a helical-coiled once-through steam generator, Heliyon (2024), Vol.10, Issue 2, https://doi.org/10.1016/j.heliyon.2024.e24149 (Impact Factor: 3.4, Cell Press, Q1 Ranked, Scopus Indexed Journal)

Dr. Mohammad Monjurul Ehsan

Asif Iqbal Turja, Khandekar Nazmus Sadat, Md Mahmudul Hasan, Yasin Khan, Md Monjurul Ehsan, “Waste Heat Recuperation in Advanced Supercritical CO2 Power Cycles with Organic Rankine Cycle Integration & Optimization Using Machine Learning Methods” International Journal of Thermofluids (2024) 100612 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000545

Dr. Mohammad Monjurul Ehsan

Ashraf Mustakim, SM Naqib Ul Islam, Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Numerical Assessment of Advanced Thermo-Hydrodynamic Characteristics of Nanofluid inside a Helically Featured Straight Pipe” International Journal of Thermofluids (2024) 100591 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000338

Dr. A. R. M. Harunur Rashid

Iqbal, M., Morshed, S., Iqbal, S. & Rashid, A., Study on Working Conditions of a Selected Garments Factory in Bangladesh during Covid 19 situation, Journal of Mechanical Engineering, ME Division, IEB, pp 18-27, Vol: ME 51, No 1, June 2022.

Yasin Khan

Asif Iqbal Turja, Md Mahmudul Hasan, M Monjurul Ehsan, Yasin Khan. “Multi-Objective Performance Optimization & Thermodynamic Analysis of Solar Powered Supercritical CO2 Power Cycles Using Machine Learning Methods & Genetic Algorithm” Energy and AI 15 (2024) 100327 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S266654682300099X

Yasin Khan

Asif Iqbal Turja, Khandekar Nazmus Sadat, Md Mahmudul Hasan, Yasin Khan, Md Monjurul Ehsan, “Waste Heat Recuperation in Advanced Supercritical CO2 Power Cycles with Organic Rankine Cycle Integration & Optimization Using Machine Learning Methods” International Journal of Thermofluids (2024) Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000545

2023 (62)

Mr. Tanvir Shahriar

A. Rashid, T.H. Nakib, T. Shahriar, M. A. Habib, and M. Hasanuzzaman, Energy and Economic Analysis of an Ocean Thermal Energy Conversion Plant for Bangladesh: A Case Study, Ocean Engineering, Vol. 293, Art. 116625 (2024) .

Mr. Tanvir Shahriar

M. Alam, I. Kayes, A. Hasan, T. Shahriar, and M. A. Habib, Exploring SAARC’s Ocean Energy Potential: Current Status and Future Policies, Energy Reports, Vol. 11, pp. 754–778 (2024) .

Dr. Madihah Binti Haji Maharof

Jamaludin, A Sudianto, N Mat Seman, A Othman, M Maharof, SH Yahaya, AU Patwari, 2023. Performance Analysis of a CAD/CAM-MATLAB/Simulink Interpreter in Milling Machine Application. Journal of Advanced Manufacturing Technology, 17(3).

Dr. Madihah Binti Haji Maharof

AF Azmin, S Shamsuddin, SH Kamat, MM Ali, M Maharof, H Yussof, 2023. Evaluating Kansei Emotion Responses in Human-Robot Interaction With Low-Cost Robots in Educational Setting. Journal of Advanced Manufacturing Technology, 17(3).

Dr. Mohammad Monjurul Ehsan

Asif Iqbal Turja, Md Mahmudul Hasan, M Monjurul Ehsan, Yasin Khan. “Multi-Objective Performance Optimization & Thermodynamic Analysis of Solar Powered Supercritical CO2 Power Cycles Using Machine Learning Methods & Genetic Algorithm” Energy and AI 15 (2024) 100327 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S266654682300099X

Arafat Ahmed Bhuiyan, PhD

Masud Rana, Mashrur Muntasir Nuhash, Arafat A. Bhuiyan, A CFD modelling for optimizing geometry parameters for improved performance using clean energy geothermal ground-to-air tunnel heat exchangers, Case Studies in Thermal Engineering, Article Number:103867 (2023). Quartile: Q1, Impact Factor: 6.8

Dr. Mohammad Monjurul Ehsan

Salim Sadman Bishal, Ahmed Imtiaz Anando, Dewan Fahim Faysal, M. Monjurul Ehsan. “Performance Evaluation of a Novel Multigeneration Plant of Cooling, Power, and Seawater Desalination Using Supercritical CO2 Partial Cooling, ME-TVC Desalination, and Absorption Refrigeration Cycles” Energy Conversion and Management: X 20 (2023) 100485 Impact factor-6.3, Cite Score-5.9, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174523001411

Prof. Dr. Md. Rezwanul Karim

Md Ashiqur Rahman, Md Rezwanul Karim, M Monjurul Ehsan. “Solar energy harvesting from evacuated flat plate collector: Design, thermo-economic analysis, and off design performance”, Results in Engineering, Volume 20 (2023): 101461, https://www.sciencedirect.com/science/article/pii/S2590123023005881 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

Arafat Ahmed Bhuiyan, PhD

Abyaz Abid, A. K. Azad and Arafat A. Bhuiyan, Optimizing radiation performance of plasma based hybrid bioconvective nanofluids integrated Magneto-hydrodynamic (MHD) micropump for tertiary level radiative oncology, Scientific Reports, vol 13, Article number: 18452 (2023) Quartile: Q1, Impact Factor: 4.22,

Dr. Md. Anayet Ullah Patwari

Shah Alam, Anayet U Patwari [2023] “Effect of Vibration on Mechanical Properties in Sand Casting Process Using Organic” Journal of Advanced Research in Applied mechanics, volume 111, Issue 1, (1-8).

Mahdi Hafiz Nabil

M. H. Nabil, Y. Khan, M. W. Faruque, and M. M. Ehsan, “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger,” Energy Convers Manag, vol. 295, p. 117630, Nov. 2023, doi: 10.1016/j.enconman.2023.117630.

Yasin Khan

Mahdi Hafiz Nabil, Yasin Khan, Md Walid Faruque, M Monjurul Ehsan. “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger”, Energy Conversion and Management 295 (2023): 117630. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423009767

Prof. Dr. Md. Rezwanul Karim

MA Rahman, RRM Salahuddin, S Salehin, MR Karim, Techno-economic and environmental feasibility analysis of solar industrial process heating systems in textile industries of Bangladesh, International Journal of Thermofluids, Volume 20 (2023), 100459, https://doi.org/10.1016/j.ijft.2023.100459 (Cite Score: 9.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Mohammad Monjurul Ehsan

Asif Iqbal Turja, Khandekar Nazmus Sadat, Yasin Khan, M Monjurul Ehsan. “Cascading the Transcritical CO2 and Organic Rankine Cycles with Supercritical CO2 Cycles for Waste Heat Recovery”, International Journal of Thermofluids (2023) 100508. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723002239

Yasin Khan

Asif Iqbal Turja, Khandekar Nazmus Sadat, Yasin Khan, M Monjurul Ehsan. “Cascading the Transcritical CO2 and Organic Rankine Cycles with Supercritical CO2 Cycles for Waste Heat Recovery”, International Journal of Thermofluids (2023) 100508. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723002239

Dr. Md. Anayet Ullah Patwari

Shah Alam, Anayet U Patwari [2023] “Effect of Vibration on Mechanical Properties in Sand Casting Process Using Organic” Journal of Advanced Research in Applied mechanics, volume 111, Issue 1, (1-8).

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, Shah Alam Bhuiyan “Improvement of drilled holes quality by voice-activated ultrasonic vibration assisted drilling process of different orientation” 1st international conference on Aerospace Structural dynamics (ICASD) held on Sep 15 to September 17 in Xi’an, China

Dr. Md. Anayet Ullah Patwari

Shah Alam Bhuiyan, Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, “Development of a mathematical model for the prediction of drill quality in voice-activated ultrasonic vibration assisted drilling process” 1st international conference on Aerospace Structural dynamics (ICASD) held on Sep 15 to September 17 in Xi’an, China

Dr. Mohammad Monjurul Ehsan

Md Ashiqur Rahman, Md Rezwanul Karim, M Monjurul Ehsan. “Solar energy harvesting from evacuated flat plate collector: Design, thermo-economic analysis, and off design performance”, Results in Engineering 20 (2023): 101461. Cite Score-4.5, Impact factor-5, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590123023005881

Md.Hasibur Rahman Hamim

Baigh, T. A., Nanzeeba, F., Hamim, H. R., & Habib, M. A. (2023). A comprehensive study on the effect of hybridization and stacking sequence in fabricating cotton-blended jute and pineapple leaf fibre biocomposites. In Heliyon (Vol. 9, Issue 9, p. e19792). Elsevier BV. https://doi.org/10.1016/j.heliyon.2023.e19792

Dr. Mohammad Monjurul Ehsan

Mahdi Hafiz Nabil, Yasin Khan, Md Walid Faruque, M Monjurul Ehsan. “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger”, Energy Conversion and Management 295 (2023): 117630. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423009767

Dr. Mohammad Monjurul Ehsan

Foyez Ahmad, Sajjad Mahmud, M Monjurul Ehsan, Musfequs Salehin. “Numerical Assessment of Nanofluids in Corrugated Minichannels: Flow Phenomenon and Advanced Thermo-Hydrodynamic Analysis”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001647

Yasin Khan

Yasin Khan, Md Walid Faruque, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis”, Energy Conversion and Management 289 (2023): 117190. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423005368

Mahdi Hafiz Nabil

Y. Khan, M. W. Faruque, M. H. Nabil, and M. M. Ehsan, “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis,” Energy Convers Manag, vol. 289, p. 117190, Aug. 2023, doi: 10.1016/j.enconman.2023.117190.

Arafat Ahmed Bhuiyan, PhD

Mashrur Muntasir Nuhash, Md Ibthisum Alam, Ananta Zihad, Md Jahid Hasan, Fei Duan, Arafat A. Bhuiyan, Md.Rezwanul Karim, Enhancing energy harvesting performance of a flat plate solar collector through integrated carbon-based and metal-based nanofluids, International Journal of Thermofluids, In Press, Journal Pre-proof, 101276, 2023. Quartile: Q1, Impact Factor: 5.0, DOI: https://doi.org/10.1016/j.rineng.2023.101276

Mohammad Muhtasim Mashfy

Mitin Mubarrat, Mohammad Muhtasim Mashfy, Talat Farhan, M Monjurul Ehsan, “Research Advancement and Potential Prospects of Thermal Energy Storage in Concentrated Solar Power Application”, International Journal of Thermofluids (2023): 100431.Volume 20. Cite Score-9.2, SJR rank-Q-1 https://doi.org/10.1016/j.ijft.2023.100431 https://www.sciencedirect.com/science/article/pii/S2666202723001477

Sharmin Akter Urmee

S. A. Urmee, & M. M. Hossain, “Lean Manufacturing is a Prerequisite for Automation, A Quantified Study”, 1st IUT International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE), Gazipur, Dhaka, July 21-22, 2023.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Arman Hossain, Irteza Maroof, Fahim Mahmud, ”An Innovative approach at assess the potentiality of using activated carbon and rice husk ash in primary cells, paper ID 203, International conference on Mechanical, Materials and Production Engineering (ICMMPE), Dhaka, Bangladesh, 21-22 July 2023

Dr. Md. Anayet Ullah Patwari

Z. Jamaludin, A. Sudianto, N. Mat Seman, A. Othman,. M. Maharof, L. Abdullaah, A U Patwari, ”Tracking performance Analysis of a CAM-Matlab/Simulink interpreter for milling machine application, paper ID 145, International conference on Mechanical, Materials and Production Engineering (ICMMPE), Dhaka, Bangladesh, 21-22 July 2023

Dr. Mohammad Monjurul Ehsan

Mitin Mubarrat, Mohammad Muhtasim Mashfy, Talat Farhan, M Monjurul Ehsan. “Research Advancement and Potential Prospects of Thermal Energy Storage in Concentrated Solar Power Application”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001477

Dr. Mohammad Monjurul Ehsan

Md. Ibthisum Alam, Mashrur Muntasir Nuhash, Ananta Zihad, Taher Hasan Nakib, M Monjurul Ehsan, “Conventional and Emerging CSP Technologies and Design Modifications: Research Status and Recent Advancements”, International Journal of Thermofluids (2023): 100406. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001234

Dr. Mohammad Monjurul Ehsan

Ahmed Imtiaz Anando, M Monjurul Ehsan, Md. Rezwanul Karim, Arafat A Bhuiyan, Md. Ahiduzzaman, Azharul Karim, “Thermochemical Pretreatments to Improve the Fuel Properties of Rice Husk: A Review”, Renewable Energy, (2023):118917. Impact factor-8.63, Cite Score-16.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0960148123008236

Dr. Mohammad Monjurul Ehsan

Yasin Khan, Md Walid Faruque, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis”, Energy Conversion and Management 289 (2023): 117190. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423005368

Muhammad Mahmood Hasan

Hasan, Muhammad Mahmood, Md Ehsanul Haque, Mohammad Tosif Nur Zahin, M. M. Islam, Mohammad Ahsan Habib, and M. Hasanuzzaman. "A Comparative Analysis of Energy Consumption and GHG Emission by the Private Vehicles of Different Fuel Types in Dhaka, Bangladesh." Energy Nexus (2023): 100222. https://doi.org/10.1016/j.nexus.2023.100222, CiteScore - 7.7, Impact Factor - 8, SJR rank - Q1.

Prof. Dr. Md. Rezwanul Karim

MM Nuhash, MI Alam, A Zihad, MJ Hasan, F Duan, AA Bhuiyan, MR Karim, Enhancing energy harvesting performance of a flat plate solar collector through integrated carbon-based and metal-based nanofluids, Results in Engineering, Vol. 19 (2023) 101276, https://doi.org/10.1016/j.rineng.2023.101276 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

Prof. Dr. Md. Rezwanul Karim

AI Anando, MM Ehsan, MR Karim, AA Bhuiyan, M Ahiduzzaman, A Karim, Thermochemical pretreatments to improve the fuel properties of rice husk: A review, Renewable Energy, Volume 215, 2023, 118917, https://doi.org/10.1016/j.renene.2023.118917 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mohammad Muhtasim Mashfy

Mainuddin Khaled, Gias Kamal, Kawsar Ahmed Porosh, Mohammad Muhtasim Mashfy and Hamidur Rahman, “Experimental approach of producing biogas from fallen leaves with co-digestion” BIO Web Conf., Volume 62, 03003, pg-8, 2023, https://doi.org/10.1051/bioconf/20236203003

Arafat Ahmed Bhuiyan, PhD

Md. Jahid Hasan, Arafat A. Bhuiyan, Thermo-hydrodynamic characteristics and entropy generation in a tube heat exchanger using multiple head ribbed geometries, South African Journal of Chemical Engineering, In Press, Journal Pre-proof, 2023. Quartile: Q1, Cite Score: 6.9, DOI: https://doi.org/10.1016/j.sajce.2023.06.009

Dr. Mohammad Monjurul Ehsan

Abrar Sobhan Chowdhury, M Monjurul Ehsan. “A Critical Overview of Working Fluids in Organic Rankine, Supercritical Rankine, and Supercritical Brayton Cycles Under Various Heat Grade Sources”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001428

Arafat Ahmed Bhuiyan, PhD

AI Anando, MM Ehsan, MR Karim, Arafat A. Bhuiyan, M Ahiduzzaman, A Karim, Thermochemical pretreatments to improve the fuel properties of rice husk: A review, Journal of Renewable Energy, Vol. 215, 118917, 2023. Quartile: Q1, Impact Factor: 8.7, DOI: https://doi.org/10.1016/j.renene.2023.118917

Dr. Md. Abu Shaid Sujon

Enhancement of viscoelastic property of MABS processed by melt compounding and injection molding Journal: Journal of Applied Polymer Science, Volume 140, Issue 2, 2023 DOI: https://doi.org/10.1002/app.53309

Prof. Dr. Md. Rezwanul Karim

F Hossain, MJ Hasan, MZ Sarkar, MR Karim, AA Bhuiyan, Prediction of carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh, Results in Engineering, Vol. 18 (2023) 101159, https://doi.org/10.1016/j.rineng.2023.101159 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

Dr. Md. Abu Shaid Sujon

Enhancing vibration damping properties of MABS/VDT blends using SEBS-g-MAH as a compatibilizer Journal: Journal of Polymer Research, Volume 30, Issue 12, 2023 DOI: https://doi.org/10.1007/s10965-023-03819-y Details: ISSN: 1022-9760

Arafat Ahmed Bhuiyan, PhD

Raditun E. Ratul, Farid Ahmed, Syed Alam, Md. Rezwanul Karim, Arafat A. Bhuiyan, Numerical study of turbulent flow and heat transfer in a novel design of serpentine channel coupled with D-shaped jaggedness using hybrid nanofluid, Alexandria Engineering Journal, Volume 68, Pages 647-663, 1 April 2023. Q1, Impact Factor: 6.626, DOI: https://doi.org/10.1016/j.aej.2023.01.061

Prof. Dr. Md. Rezwanul Karim

RE Ratul, F Ahmed, S Alam, MR Karim, AA Bhuiyan, Numerical study of turbulent flow and heat transfer in a novel design of serpentine channel coupled with D-shaped jaggedness using hybrid nanofluid, Alexandria Engineering Journal (2023), Vol. 68, pp. 647-663. https://doi.org/10.1016/j.aej.2023.01.061 (Impact Factor: 6.8, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Md. Anayet Ullah Patwari

Noman K, Li Y, Wen G, Patwari AU, Wang S. Continuous monitoring of rolling element bearing health by nonlinear weighted squared envelope-based fuzzy entropy. Structural Health Monitoring. 2023;. doi:10.1177/14759217231163090

Arafat Ahmed Bhuiyan, PhD

Nasimul Ehsan Chowdhury, Md. Faysal Hossain, Md. Mashud Karim, M. Rafiqul Islam, Arafat A. Bhuiyan, Numerical Investigation for Mitigation of Cavitation in High-Speed Marine Propeller Using Mass Injection Approach, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, March, 2023. Q2, IF: DOI: 10.1007/s40997-023-00636-y

Mahdi Hafiz Nabil

M. W. Faruque, Y. Khan, M. H. Nabil, and M. M. Ehsan, “Parametric analysis and optimization of a novel cascade compression-absorption refrigeration system integrated with a flash tank and a reheater,” Results in Engineering, vol. 17, 2023, doi: 10.1016/j.rineng.2023.101008.

Dr. Mohammad Monjurul Ehsan

Tasnuva Sharmin, Nazia Rodoshi Khan, Md. Saleh Akram, M Monjurul Ehsan. “A State-of-the-art Review on for Geothermal Energy Extraction, Utilization, and Improvement Strategies: Conventional, Hybridized, and Enhanced Geothermal Systems”. International Journal of Thermofluids (2023): Cite Score-6.6, SJR rank-Q-1

Dr. Mohammad Monjurul Ehsan

Md Walid Faruque, Yasin Khan, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Parametric Analysis and Optimization of a Novel Cascade Compression-Absorption Refrigeration System Integrated with a Flash Tank and a Reheater”. Results in Engineering (2023): Cite Score-3.9, SJR rank-Q-1

Dr. Mohammad Monjurul Ehsan

Taspia Shawkat Chowdhury, Fatima Tasneem Mohsin, Morium Mannan Tonni, Mita Noor Hasan Mita, M Monjurul Ehsan. “A Critical Review on Gas Turbine Cooling Performance and Failure Analysis of Turbine Blades”. International Journal of Thermofluids (2023): Cite Score-6.6, SJR rank-Q-1

Yasin Khan

Md Walid Faruque, Yasin Khan, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Parametric Analysis and Optimization of a Novel Cascade Compression-Absorption Refrigeration System Integrated with a Flash Tank and a Reheater”. Results in Engineering (2023): Cite Score-3.9, SJR rank-Q-1

Prof. Dr. Md. Rezwanul Karim

MS Hossain, MAI Rahat, MSH Khan, S Salehin, MR Karim, Solar-driven Dish Stirling System for sustainable power generation in Bangladesh: A case study in Cox’s Bazar, Heliyon (2023), Vol. 9, Issue 3. https://doi.org/10.1016/j.heliyon.2023.e14322 (Impact Factor: 4.0, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mahdi Hafiz Nabil

M. Walid Faruque, Y. Khan, M. Hafiz Nabil, M. Monjurul Ehsan, and A. Karim, “Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System,” Thermal Science and Engineering Progress, vol. 39, p. 101745, Mar. 2023, doi: 10.1016/j.tsep.2023.101745.

Dr. Mohammad Monjurul Ehsan

Md Maruf Ahmed, M. Monjurul Ehsan. “Design and Off-Design Performance Analysis of a Zigzag Channeled Pre-cooler for Indirect Cooling System of Supercritical CO2 Recompression Cycle incorporated with a Flow-Bypass System”. Applied Thermal Engineering (2023): Impact factor-6.46, Cite Score-10.7, SJR rank-Q-1

Yasin Khan

Faruque, Md Walid, Yasin Khan, Mahdi Hafiz Nabil, M. Monjurul Ehsan, and Azharul Karim. "Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System." Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904923000987

Dr. Mohammad Nasim

M. Nasim, U. Galvanetto, Muscle activity on head-first compression responses of a finite element neck model, Forces in Mechanics; 10: 100163 (2023). doi.org/10.1016/j.finmec.2022.100163

Arafat Ahmed Bhuiyan, PhD

Farzad Hossain, Md. Jahid Hossain, Md Zakaria Sarkar, Md. Rezwanul Karim, Arafat A. Bhuiyan, Prediction of carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh, Results in Engineering, In Press, Journal Pre-Proof, 101159, 2023. Quartile: Q2, Impact Factor: 5.0, DOI: https://doi.org/10.1016/j.rineng.2023.101159

2022 (26)

Sharmin Akter Urmee

A. Kabir, F. Kabir, S. N. Chowdhury, S. A. Urmee, & A. H. Rashid, “Literature Review and primary design on Ergonomic Handgrip for Public Transportation”, Proceedings of the 5th International Conference on Industrial & Mechanical Engineering and Operations Management, Dhaka, Bangladesh, December 26-27, 2022. Available at: https://ieomsociety.org/proceedings/2022dhaka/162.pdf

Dr. Mohammad Nasim

P.G. Pavan, M. Nasim, V. Brasco, S. Spadoni, F. Paoloni, D. D'Avella, S. F. Khosroshahi, N. de Cesare, K. Gupta, U. Galvanetto, Development of detailed finite element models for in silico analyses of brain impact dynamics, Computer Methods and Programs in Biomedicine; 227: 107225 (2022). doi.org/10.1016/j.cmpb.2022.107225

Mr. Chowdhury Sadid Alam

H.Z. Mawa, M. A. K. Azad, Chowdhury Sadid Alam, M. M. Rahman, 2022, “A Numerical Study of Non- Newtonian Fluid in a Cavity with Corrugated Bottom Wall Using Buongiorno’s Mathematical Model: Numerical Study of Non-Newtonian Fluid in a Cavity", Trends in Sciences, 19(23), pp. 1588-1588.

Arafat Ahmed Bhuiyan, PhD

Md. Jahid Hasan, Arafat A. Bhuiyan, Investigation of thermal performance and entropy generation in a helical heat exchanger with multiple rib profiles using Al2O3-water nanofluid, Case studies in Thermal Engineering, Volume 40, 2022. IF: 6.268, DOI: https://doi.org/10.1016/j.csite.2022.102514

Arafat Ahmed Bhuiyan, PhD

Md. Jahid Hasan, Shams Forruque Ahmed, Arafat A. Bhuiyan, Geometrical and coil revolution effects on the performance enhancement of a helical heat exchanger using nanofluids, Case studies in Thermal Engineering, Volume 35, Pages , 2022. IF: 6.268, DOI: https://doi.org/10.1016/j.csite.2022.102106

Mr. Sayedus Salehin

Md Walid Faruque, Mohammed Raihan Uddin, Sayedus Salehin, M Monjurul Ehsan, "A Comprehensive Thermodynamic Assessment of Cascade Refrigeration System Utilizing Low GWP Hydrocarbon Refrigerants", International Journal of Thermofluids, Vol 15, pp: 100177, Elsevier (July 2022) [https://www.sciencedirect.com/science/article/pii/S2666202722000416]

Dr. Mohammad Monjurul Ehsan

Md Walid Faruque,, Mohammed Raihan Uddin, Sayedus Salehin, and M. Monjurul Ehsan. "A Comprehensive Thermodynamic Assessment of Cascade Refrigeration System Utilizing Low GWP Hydrocarbon Refrigerants." International Journal of Thermofluids (2022): 100177. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202722000416

Dr. Mohammad Nasim

M. Nasim, M.J. Hasan, U. Galvanetto, Impact behavior of energy absorbing helmet liners with PA12 lattice structures: A computational study, International Journal of Mechanical Sciences; 233: 107673 (2022). doi.org/10.1016/j.ijmecsci.2022.107673

Mr. Sayedus Salehin

Shadman Mahmud, Mohammad Kazem Kaihan, Sayedus Salehin, Mohammad Tanvirul Ferdaous, Mohammad Nasim, "Hybrid renewable energy systems for a remote community in a high mountain plateau", International Journal of Energy and Environmental Engineering, pp: 1-14, Springer (April 2022) [https://link.springer.com/article/10.1007/s40095-022-00494-5]

Arafat Ahmed Bhuiyan, PhD

Abyaz Abid, Arafat A. Bhuiyan, A finite element analysis approach to design and optimize the static structural impact on a skateboard, Materials Today: Proceedings, Volume , Pages , April 2022.

Arafat Ahmed Bhuiyan, PhD

Farzad Hossain, Md. Rezwanul Karim, Arafat A. Bhuiyan, A review on recent advancements of the usage of nano fluid in hybrid photovoltaic/thermal (PV/T) solar systems, International Journal of Renewable Energy, Vol 188, Pages 114-131, April 2022.

Arafat Ahmed Bhuiyan, PhD

Nasimul Ehsan Chowdhury, Mahmudul Hasan Shakib, Fei Xu, Sayedus Salehin, Arafat A. Bhuiyan, Adverse environmental impacts of wind farm installations and alternative research pathways to their mitigation, International Journal of Cleaner Engineering and Technology, Volume 7, 100415, April 2022.

Mr. Sayedus Salehin

Md Abdullah Al Mamun, Md Akbar Hossain, Sayedus Salehin, Md Shahadat Hossain Khan, Mahbub Hasan, "Engineering students’ readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country", Educational Technology & Society, 25 (3), 1-18. (March 2022) [https://www.jstor.org/stable/48673722]

Yasin Khan

Yasin Khan, Md Tanbir Sarowar, Mahir Mobarrat, Md. Hamidur Rahman, "Performance Comparison of a Microchannel Heat Sink using different Nano-Liquid-Metal-Fluid Coolant: A numerical study", Journal of Thermal Science and Engineering Applications, March 2022.

Mr. Sayedus Salehin

Md Walid Faruque, Mahdi Hafiz Nabil, Mohammed Raihan Uddin, M. Monjurul Ehsan, Sayedus Salehin, "Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications", Energy Conversion and Management: X, Vol 14, pp: 100207, Elsevier (March 2022) [https://www.sciencedirect.com/science/article/pii/S2590174522000307]

Dr. Mohammad Monjurul Ehsan

ANM Nihaj Uddin Shan, Md Zayed Mostafa, Arman Hossain, Mohmmad Shadman Sakib, M Monjurul Ehsan (2022, " Thermal Assessment and Optimization of Process Fluids in Transcritical Organic and Transcritical CO2 Rankine Cycle for Waste Energy Recuperating System" Energy Conversion and Management: X (2022): 100258.Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174522000812

Mahdi Hafiz Nabil

M. Walid Faruque, M. Hafiz Nabil, M. Raihan Uddin, M. Monjurul Ehsan, and S. Salehin, “Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications,” Energy Conversion and Management: X, vol. 14, 2022, doi: 10.1016/j.ecmx.2022.100207.

Dr. Mohammad Nasim

S. Mahmud, M.K. Kaihan, S. Salehin, M.T. Ferdaous, M. Nasim, Hybrid renewable energy systems for a remote community in a high mountain plateau, International Journal of Energy and Environmental Engineering; 13: 1335-1348 (2022). doi.org/10.1007/s40095-022-00494-5

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.N.M Nihaj Uddin Shan, Md. Zayed Mostafa, Md.Iftekhar uddin Shohan [2022], Experimental Investigations on acoustic energy conversion using single and double PZT film by modified resonator” –Lectures note on Mechanical Engineering-springer Publication, pp. 86–95, 2022 https://doi.org/10.1007/978-981-16-8954-3_9

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.N.M Nihaj Uddin Shan, Rahnum Tahia Meem [2022], Computational Analysis on tool geometry on cutting process in Turning of AISI 1020 steel-Accepted for publication Lectures note on Mechanical Engineering-springer Publication, LNME, pp. 295–304, 2022 https://doi.org/10.1007/978-981-16-8954-3_28

Mr. Tanvir Shahriar

M.M. Hossain, T. Shahriar, M.A. Habib et al., 2022, "Techno-economic and environment assessment of landfill and sewage treatment plant-based combined power generation system: a case study for Dhaka", Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-022-02422-3

Mr. Chowdhury Sadid Alam

Chowdhury Sadid Alam, Radif Uddin Ahmed, M Shafiqur Rahman, 2023, “Tensile and Fatigue Response of Steel Parts Fabricated by The Additive Friction-Stir Deposition Process”, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, New Orleans, USA, Oct 29-Nov 2, 2023.

Prof. Dr. Md. Rezwanul Karim

F Hossain, MR Karim, AA Bhuiyan, A review on recent advancements of the usage of nano fluid in hybrid photovoltaic/thermal (PV/T) solar systems, Renewable Energy, Elsevier. (2022), Volume 188, April 2022, pp.114-131. DOI: https://doi.org/10.1016/j.renene.2022.01.116 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Arafat Ahmed Bhuiyan, PhD

Jahid Hasan, Kazi Tawkir, Arafat A. Bhuiyan, Improvement of an exhaust gas recirculation cooler using discrete ribbed and perforated louvered strip vortex generator , International Journal of Thermofluids, Volume 13, February 2022, 100132.

Mr. Sayedus Salehin

Nasimul Eshan Chowdhury, Mahmudul Alam Shakib, Fei Xu, Sayedus Salehin, Md Rashidul Islam, Arafat A Bhuiyan, "Adverse environmental impacts of wind farm installations and alternative research pathways to their mitigation", Cleaner Engineering and Technology, Vol 7, pp: 100415, Elsevier (January 2022) [https://www.sciencedirect.com/science/article/pii/S2666790822000209]

Mr. Sayedus Salehin

Shadman Mahmud, ASM Redwan Haider, Sk Tahmid Shahriar, Sayedus Salehin, ASM Monjurul Hasan, Maria T Johansson, "Bioethanol and biodiesel blended fuels — Feasibility analysis of biofuel feedstocks in Bangladesh", Energy Reports, Volume 8, pp: 1741-1756, Elsevier (January 2022) [https://www.sciencedirect.com/science/article/pii/S2352484722000014]

2021 (24)

Prof. Dr. Md. Rezwanul Karim

M S Hossain, S Shajid, M R Karim, Numerical investigation to assess the techno-economic feasibility of solar central receiver system for off-grid power in Saint Martin's Island, Bangladesh, Energy for Sustainable Development, Elsevier. Volume 65, December 2021, Pages 63-76. DOI: https://doi.org/10.1016/j.esd.2021.09.008 (Impact Factor: 5.5, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mr. Sayedus Salehin

Mohammad Masrur Hossain, Niyaz Afnan Ahmed, Md Abid Shahriyar, M Monjurul Ehsan, Fahid Riaz, Sayedus Salehin, Chaudhary Awais Salman, "Analysis and optimization of a modified Kalina cycle system for low-grade heat utilization", Energy Conversion and Management: X, Vol 12, pp: 100121, Elsevier (October 2021) [https://www.sciencedirect.com/science/article/pii/S2590174521000465]

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Saiful Islam, Md. Sayeed Ul Hasan [2021] “Development of a thermo-acoustic device for the conversion of sound waves into cold air” ACTA Technical Corviniensis, Volume XIV, issue 1, pp 57-60.

Prof. Dr. Md. Rezwanul Karim

M F Diba, M R Karim, J Naser, CFD modelling of coal gasification in a fluidized bed with the effects of calcination under different operating conditions, Energy, Elsevier. Volume 239, Part C, 15 January 2022, 122284. DOI: https://doi.org/10.1016/j.energy.2021.122284 (Impact Factor: 9.0, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Sharmin Akter Urmee

Hasan, Z., Urmee, S. A. Examining the need to synchronize human resource quality with intelligent systems and machines in Industry 4.0. Quality Progress. 54 (0). 28-37. Available at: https://asq.org/quality-progress/articles/cutting-into-a-skills-deficit?id=ebaf77464ab5429898f176fa240d63aa

Dr. Mohammad Nasim

M. Nasim, U. Galvanetto, Mechanical characterisation of additively manufactured PA12 lattice structures under quasi-static compression, Materials Today Communications; 29: 102902 (2021), doi.org/10.1016/j.mtcomm.2021.102902.

Mr. Sayedus Salehin

Adib Adnan, Shadman Mahmud, Mohammed Raihan Uddin, Anish Modi, M. Monjurul Ehsan, Sayedus Salehin, "Energy, Exergy, Exergoeconomic, and environmental (4E) analyses of thermal power plants for municipal solid waste to energy application in Bangladesh", Waste Management, Vol 134, pp 136-148 (August 2021) [https://www.sciencedirect.com/science/article/pii/S0956053X21004311]

Mr. Sayedus Salehin

Sayedus Salehin, Sheikh Nazrul Islam, Syed Rafat Faysal, Saiful Huque, Md. Nazrul Islam Khan, Musfequs Salehin, Ifat Rabbil Qudrat Ovi, AKM Sadrul Islam, “Heat Retention Cookers for Energy Saving and Extended Shelf Life with Better Nutrient Preservation”, (Pre-print) SSRN (July 2021) [https://ssrn.com/abstract=3895679]

Mr. Sayedus Salehin

Mohammed Raihan Uddin, Shadman Mahmud, Sayedus Salehin, Md Abdul Aziz Bhuiyan, Fahid Riaz, Anish Modi, Chaudhary Awais Salman, "Energy analysis of a solar driven vaccine refrigerator using environment-friendly refrigerants for off-grid locations", Energy Conversion and Management: X, Vol 11, pp: 100095, Elsevier (July 2021) [https://www.sciencedirect.com/science/article/pii/S2590174521000209]

Arafat Ahmed Bhuiyan, PhD

Muhammad Awais, Arafat A. Bhuiyan, Sayedus Salehin, Mohammad Monjurul Ehsan, Basit Khan, Md. Hamidur Rahman, Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview, International Journal of Thermofluids, pp. 100086, 2021/05/09/, 2021

Mr. Sayedus Salehin

Md Abdullah Al Mamun, Md Akbar Hossain, Sayedus Salehin, Md Shahadat Hossain Khan, Mahbub Hasan, "Engineering students’ readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country", (Pre-print) Research Square (April 2021) [https://doi.org/10.21203/rs.3.rs-374991/v1]

Dr. Mohammad Nasim

M. Nasim, A. Cernicchi, U. Galvanetto, Development of a finite element neck model for head-first compressive impacts: toward the assessment of motorcycle neck protective equipment, IMechE H: Journal of Engineering in Medicine; 235 (9): 1001-1013 (2021). doi.org/10.1177/09544119211018112

Mr. Sayedus Salehin

Muhammad Awais, Arafat A. Bhuiyan, Sayedus Salehin, Mohammad Monjurul Ehsan, Basit Khan, Md. Hamidur Rahman, "Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview", International Journal of Thermofluids, Vol 10, pp: 100086, Elsevier (March 2021) [https://www.sciencedirect.com/science/article/pii/S2666202721000240]

Prof. Dr. Md. Rezwanul Karim

A. R. Sarhan, M.R. Karim, Jamal. Naser, Bubble Column CFD Model with Effects of Forced Oscillations on bubble dynamics, Chemical Engineering and Technology, (2021). Volume 44, Issue 6, June 2021, Pages 1111-1120. DOI: https://doi.org/10.1002/ceat.202000533 (Impact Factor: 2.1, Q2 Ranked, ISI/Scopus Indexed Journal)

Arafat Ahmed Bhuiyan, PhD

F. Ahmed, M. A. Abir, A. S. M. Redwan, Arafat A. Bhuiyan, and A. S. Mollah, The impact of D-shaped jaggedness on heat transfer enhancement technique using Al2O3 based nanoparticles, International Journal of Thermofluids, pp. 100069, 2021/02/09/, 2021

Mr. Sayedus Salehin

Sayedus Salehin, Syed Shaheer Uddin Ahmed, Md. Ehasanul Hoque, M Salahuddin Mrigdad, SM Ashef Hussain, SM Tahsin Intisar, “Assessment of biogas generation potential from slaughterhouse wastes in Dhaka city, Bangladesh”, Waste Disposal & Sustainable Energy, Vol. 3 (1), pp 41–48, Springer (January 2021) [https://link.springer.com/article/10.1007/s42768-020-00061-w]

Mr. Sayedus Salehin

Muhammad Awais, Najeeb Ullah, Javaid Ahmad, Faizan Sikandar, Mohammad Monjurul Ehsan, Sayedus Salehin, Arafat Ahmed Bhuiyan, “Heat transfer and pressure drop performance of Nanofluid: A state-of- the-art review", International Journal of Thermofluids, Vol 9, pp: 100065, Elsevier (January 2021) [https://www.sciencedirect.com/science/article/pii/S2666202721000033]

Mr. Muhammad Awais

Awais M, N Ullah, J Ahmad, F Sikandar, MM Ehsan, S Salehin, Bhuiyan AA, Heat transfer and pressure drop performance of nanofluid: The state of the art review. International Journal of Thermofluds, Elsevier, 2021: p. 100065.

Arafat Ahmed Bhuiyan, PhD

M. Awais, N. Ullah, J. Ahmad, F. Sikandar, M. M. Ehsan, S. Salehin, and Arafat A. Bhuiyan, Heat transfer and pressure drop performance of Nanofluid: A state-of- the-art review, International Journal of Thermofluids, pp. 100065, 2021/01/16/, 2021.

Dr. A. R. M. Harunur Rashid

Iqbal, M., Dipu, M., Masfiq, M. & Rashid, A., Investigation to identify the causes of low back pains among garment workers of a selected garment factory in Bangladesh, Advances in Materials and Processing Technologies, 8:3, 3281-3296, 2022 DOI: 10.1080/2374068X.2021.1948699

Dr. Madihah Binti Haji Maharof

Jamaludin, Z., Puveneswaran, P., Chiew, T.H., Maharof, M., 2021. Design and Application of ST-SMC Controller for Position Control of a Milling Table. Intelligent Manufacturing and Mechatronics: Proceedings of SympoSIMM, pp. 236-246, 2022, Springer.

Dr. Madihah Binti Haji Maharof

Rafan, N.A., Jamaludin, Z., Chiew, T.H., Maharof, M., 2020. Nonlinear Friction Analysis of a Modified Switching Function Controller in Pre-sliding Regime. Advances in Material Sciences and Engineering, 309-318.

2020 (39)

Dr. Md. Zahid Hossain

Zahin Mostakim, Nagib Mehfuz, Moaz Ebon Zabal, Kaisar Ahammed Sajib, Md. Zahid Hossain, Comparison of Vibration Analysis among NACA Airfoil Wings Based on Natural Frequencies, International Conference on Mechanical, Industrial and Energy Engineering, 19-21 December, 2020, Khulna

Mr. Nagib Mehfuz

Zahin Mostakim, Nagib Mehfuz, Moaz Ebon Zabal, Kaisar Ahammed Sajib, Md. Zahid Hossain, “Comparison of Vibration Analysis among NACA Airfoil Wings Based on Natural Frequencies”, International Conference on Mechanical, Industrial and Energy Engineering 2020 19-21 December, 2020, Khulna, BANGLADESH

Mr. Sayedus Salehin

Taskin Jamal, Sayedus Salehin, “Hybrid renewable energy sources power systems” in Ersan Kabalcı eds. ‘Hybrid Renewable Energy Systems and Microgrids’’, Academic Press (November 2020) [https://www.sciencedirect.com/science/article/pii/B9780128217245000106]

Dr. Md. Anayet Ullah Patwari

Journal paper: 84 Book section: 08 Conference paper:128 patent granted: 01

Prof. Dr. Md. Rezwanul Karim

MF Diba, MR Karim, J Naser, Numerical modelling of a bubbling fluidized bed combustion: A simplified approach, Fuel (2020), Vol. 277, pp. 118170. DOI: https://doi.org/10.1016/j.fuel.2020.118170 (Impact Factor: 7.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. A. R. M. Harunur Rashid

Sarkar, M.,Hasanuzzaman, M., Gulshan, F., and Rashid, A., Surface, Mechanical and Shape Memory Properties of Biodegradable Polymers and Their Applications, Reference Module in Materials Science and Materials Engineering, Elsevier; pp.1-8, 2020. https://doi.org/10.1016/B978-0-12-820352-1.00050-X

Prof. Dr. Md. Rezwanul Karim

MF Diba, MR Karim, J Naser, Fluidized bed CFD using simplified solid-phase coupling, Powder Technology (2020), Vol. 375, pp.161-173. DOI: https://doi.org/10.1016/j.powtec.2020.07.074 (Impact Factor: 5.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mr. Sayedus Salehin

Md. Abdul Karim Miah, Shorab Hossain, Sayedus Salehin, “Effects of severity and dominance of viscous force on stenosis and aneurysm during pulsatile blood flow using computational modeling”, CFD Letters 12 (8), 35-54, Akademia Baru (August 2020) [https://doi.org/10.37934/cfdl.12.8.3554]

Mr. Md. Abdul Karim Miah

Md. Abdul Karim Miah, Shorab Hossain, Sayedus Salehin. “Effects of Severity and Dominance of Viscous Force on Stenosis and Aneurysm During Pulsatile Blood Flow Using Computational Modelling”.CFD Letters. vol. 12, Issue 8(2020) 35-54

Dr. Md. Zahid Hossain

Md Shahnar Islaml, Fahim Mahmud Khan and Md Zahid Hossain "Vibration Reduction of an Excavator Bucket Using Attachment Technique" Journal of International Review of Mechanical Engineering vol. 14(7) pp 414-423, 2020

Mr. Nagib Mehfuz

Md. Abdul Aziz Bhuiyan, Mehedi Hasan Bhuiyan, Md. Ashiqur Rahman, Md. Atreher Abir Mahin, Nagib Mehfuz, Sayedus Salehin, “Economic Assessment of a Concrete and Floating Based Solar Chimney Power Plant in Bangladesh for Renewable Power generation" , IEEE Region 10 Symposium (TENSYMP), Dhaka, Bangladesh June-2020

Mr. Sayedus Salehin

Md. Abdul Aziz Bhuiyan, Mehedi Hasan Bhuiyan, Md. Ashiqur Rahman, Md. Atrehar Abir, Nagib Mehfuz, Sayedus Salehin, “Economic Assessment of Concrete and Floating Based Solar Chimney Power Plants in Bangladesh”, IEEE Region 10 Symposium (TENSYMP) 2020, 05-07 June, 2020, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/9230846]

Dr. A. R. M. Harunur Rashid

F. Ahmed & A. Rashid, Framework to select vital product design methodologies using a multi-criteria decision tool for an industry segment, Journal of Advances in Materials and Processing Technologies, pp.1-9, 2020. https://doi.org/10.1080/2374068X.2020.1783945

Mr. Nagib Mehfuz

Nagib Mehfuz, Abu Shaid Sujon, "Time domain approach to identify the system properties of a coupled structure", International Journal of Scientific and Engineering Research, Volume 11, Issue 3, March-2020

Mr. Muhammad Awais

Awais M, Saad M, Ayaz H, Ehsan M, Bhuiyan AA, Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger. Thermal Science and Engineering Progress, Elsevier. 2020:100521.

Mr. Mohammed Raihan Uddin

M. R. Uddin, T. S. Saniat, S. Salehin, M. H. Rahman, Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study. Transactions of the Canadian Society for Mechanical Engineering, 2020. doi:10.1139/tcsme-2019-0120.

Mr. Sayedus Salehin

Mohammed Raihan Uddin, Tahsin Sejat Saniat, Sayedus Salehin, Md. Hamidur Rahman, “Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study”, Transactions of the Canadian Society for Mechanical Engineering, Vol. 45 (1), pp: 1-10, Canadian Science Publishing (February 2020) [https://cdnsciencepub.com/doi/abs/10.1139/tcsme-2019-0120]

Mr. Nagib Mehfuz

Abu Shaid Sujon, Nagib Mehfuz, Mohammad Ahsan Habib "Experimental and numerical investigation on the tensile and water absorption behavior of jute/carbon reinforced epoxy composite", International Journal of Mechanical Engineering and Technology, Volume 11, Issue 2, Feb.-2020

Prof. Dr. Md. Rezwanul Karim

MR Karim, AA Bhuiyan, AAR Sarhan, J Naser, CFD simulation of biomass thermal conversion under air/oxy-fuel conditions in a reciprocating grate boiler, Renewable Energy (2020), Vol. 146, pp.1416-1428. DOI: https://doi.org/10.1016/j.renene.2019.07.068 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mr. Tahsin Sejat Saniat

Uddin, Mohammed Raihan, et al. "Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study." Transactions of the Canadian Society for Mechanical Engineering ja (2020).

Arafat Ahmed Bhuiyan, PhD

M. Awais, M. Saad, Hamza Ayaz, M. M. Ehsan, Arafat A. Bhuiyan, Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger, Thermal Science and Engineering Progress, 100521, 2020.

Arafat Ahmed Bhuiyan, PhD

R. H., Ahmad, Arafat A. Bhuiyan, Xu, F., Sujon, A. S., Karim, M. R., Moin, E. H., & Islam, A. S, Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate. Journal of Thermal Analysis and Calorimetry, 139(4), 2925-2935., 2020.

Arafat Ahmed Bhuiyan, PhD

MR Karim, Arafat A. Bhuiyan, AAR Sarhan, J Naser, CFD simulation of biomass thermal conversion under air/oxy-fuel conditions in a reciprocating grate boiler, Renewable Energy, vol. 146: p. 1416-1428, 2020.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, and Alexander Klimenko. "Feasibility of dry cooling in supercritical CO2 power cycle in concentrated solar power application: Review and a case study." Renewable and Sustainable Energy Reviews 132 (2020): 110055. Impact factor-12.34. SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1364032120303464

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “Novel Design Measures for Optimizing the Yearlong Performance of a Concentrating Solar Thermal Power Plant using Thermal Storage and a Dry-Cooled Supercritical CO2 Power Block”, Energy Conversion and Management 216 (2020): 112980. Impact Factor- 8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890420305240

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “A Comprehensive Thermal Assessment of Dry Cooled Supercritical CO2 Power Cycles”, Applied Thermal Engineering 166 (2020): 114645. Impact Factor- 4.72, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1359431119339468

Dr. Mohammad Monjurul Ehsan

Awais, M, M Saad, Hamza Ayaz, M Monjurul Ehsan, Arafat A Bhuiyan. "Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger." Thermal Science and Engineering Progress (2020): 100521. Impact factor-4.40. SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904920300421

Dr. Madihah Binti Haji Maharof

M Maharof, Z Jamaludin, M Minhat, NA Anang, and TH Chiew, 2020. Force Compensation for Precise Positioning in Machine Tools via State Observer Design. The International Journal of Advanced Manufacturing Technology, 82(9-12), pp. 1693-1705.

2019 (36)

Prof. Dr. Md. Rezwanul Karim

RH Ahmad, AA Bhuiyan, F Xu, AS Sujon, MR Karim, EH Moin, AKMS Islam, Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate, Journal of Thermal Analysis and Calorimetry (2020), Vol. 139, pp. 2925-2935. DOI: https://doi.org/10.1007/s10973-019-09126-3 (Impact Factor: 4.4, Springer, Q1 Ranked, ISI/Scopus Indexed Journal)

Prof. Dr. Md. Rezwanul Karim

MSR Chowdhury, AK Azad, MR Karim, J Naser, AA Bhuiyan, Reduction of GHG emissions by utilizing biomass co-firing in a swirl-stabilized furnace, Renewable Energy (2019), Vol. 143, pp.1201-1209. DOI: https://doi.org/10.1016/j.renene.2019.05.103 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Sharmin Akter Urmee

Urmee, S. A., Wafa, J. A., Shimu, T. N., Hossain, M., Mahmud, S., Islam, M. R. (2019). LPG Leakage Detector and Controlling Device. Proceedings of 4th International Conference on Mechanical, Industrial and Materials Engineering (pp. 25). 17-19 December, Rajshahi, Bangladesh: Available at: http://icmime-ruet.ac.bd/2019/DIR/Industrial%20Engineering.html.

Sharmin Akter Urmee

Urmee, S. A., Shimu, T. N. & Billal, M. M. (2019). Impact of Forecasting Techniques and Market Demand Scenarios on Multi-Product, Multi-Period Aggregate Production Planning. Review of Industrial Engineering Letters, 5(1): 1-11. DOI: 10.18488/journal.71/2019.51.1.11 Available at: http://www.conscientiabeam.com/journal/71/html/5628.

Mr. Tanvir Shahriar

T. Shahriar, M. A. Habib, M. Hasanuzzaman & M. Shahrear-Bin-Zaman, 2019, “Modelling and Optimization of Searaser Wave Energy Converter based Hydroelectric Power Generation for Saint Martin’s Island in Bangladesh”, Ocean Engineering, Vol. 192, 106289.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud, Md. Minhazul Islam [2019], “Improvement of surface roughness during hot air streaming turning process of mild steel using Particle Swarm Optimization”- International Journal of Mechanical Engineering and Robotics, volume 8, issue 4, pp588-593.

Prof. Dr. M. Ahsan Habib

A. S. Sujon, T. H. Supto, F. Shariar, M. M. Rahman Pallab, M. Z. Abedin, M. A. Habib, “Effect of stacking sequence on the tensile and flexural properties of unidirectional jute and carbon fiber reinforced epoxy composite”, International Conference on Composite Material, Polymer Science and Engineering（CMPSE2019), Bangkok, Thailand, October 24-25, 2019.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Anas Azmayeen Zamee, Mehedi Hasan Bhuiyan, Sultan Mahmud Sakib [2019],”Surface Roughness Analysis using Sound Signal in Turning of mild steel” IOP conference series Materials Science and Engineering, 703(2019), 012011, doi:10.1088/1757-899X/703/1/012011

Mr. Sayedus Salehin

Sazzadul Alam Rahat, Mahmudul Alam Shakib, Sayedus Salehin, A K M Sadrul Islam, Md. Ahiduzzaman and Arafat A. Bhuiyan, “Experimental investigation on thermal treatment of local and marine based micro-algae for production of biodiesel”, 8th BSME International Conference on Thermal Engineering, 19–21 December, 2018, Dhaka, Bangladesh. In AIP Conference Proceedings, vol. 2121, no. 1. AIP Publishing, 2019 [https://aip.scitation.org/doi/abs/10.1063/1.5115943]

Mr. Chowdhury Sadid Alam

Md. Mustafizur Rahman, Chowdhury Sadid Alam, T.M. Abir Ahsan, 2019, “A life cycle assessment model for quantification of environmental footprints of a 3.6kWp photovoltaic system in Bangladesh”, International Journal of Renewable Energy Development, 8(2), pp. 113-118.

Mr. Md. Abdul Karim Miah

Sarhan, A. R., Miah, M. A. K., Naser, J. (2019, July). Numerical prediction of froth layer height in slurry column. In AIP Conference Proceedings (Vol. 2121, No. 1, p. 040005). AIP Publishing

Mr. Md. Abdul Karim Miah

Chowdhury, N. E., Miah, M. A. K., Bhuiyan, A. A. (2019, July). Numerical investigation on the effectiveness of water injection method for mitigating propeller cavitation. In AIP Conference Proceedings (Vol. 2121, No. 1, p. 060005). AIP Publishing

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, S. Alam Bhuiyan, Qumrul Ahsan, Iftakhar H. Khan, Nihon Rabbani [2019], Prediction and Optimization of Compressive Load of a Green Composite Material from Natural Fiber Using Statistical Approach, ICME 2019, Malaysia

Mr. Muhammad Awais

Awais M, Bhuiyan AA, Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers. International Journal of Heat and Mass Transfer, Elsevier. 2019;141:580-603.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, Anas Azmayeen Zamee, Mehedi Hasan Bhuiyan, Sultan Mahmud Sakib [2019],”Surface Roughness Analysis using Sound Signal in Turning of mild steel” Proceedings of Incite 2019, Indonesia

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, S. Alam Bhuiyan, Qumrul Ahsan, Iftakhar H. Khan, Nihon Rabbani [2019], Prediction and Optimization of Compressive Load of a Green Composite Material from Natural Fiber Using Statistical Approach, International Journal of Integrated engineering,11(7),83-89,https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5042

Mr. Muhammad Awais

Awais M, Bhuiyan AA, Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): a parametric study. International Journal of Thermal Sciences, Elsevier. 2019;140:154-66.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari,, Suleiman Mohammed Yusuf, Shahrair Ragib, Ferdous [2019],” Mathematical Model For The Prediction Of Electro-Magnetic Waves On Quality Of Drilled Holes In Composite Materials” International Journal of Engineering, volume XVII, issue 1, pp 125-130

Arafat Ahmed Bhuiyan, PhD

NE Chowdhury, AK Miah, AA Bhuiyan, Numerical investigation on the effectiveness of water injection method for mitigating propeller cavitation, AIP Conference Proceedings 2121 (1), 060005, 2019.

Arafat Ahmed Bhuiyan, PhD

SA Rahat, MA Shakib, S Salehin, AKMS Islam, M Ahiduzzaman, AA Bhuiyan, Experimental investigation on thermal treatment of local and marine based micro-algae for production of biodiesel, AIP Conference Proceedings 2121 (1), 120006, 2019.

Arafat Ahmed Bhuiyan, PhD

R Islam, STM Fahim, AA Bhuiyan, Improvement of thermal-hydraulic performance of compact heat exchangers with multi-corrugated fin and oval tube arrays, AIP Conference Proceedings 2121 (1), 030016, 2019.

Arafat Ahmed Bhuiyan, PhD

M Rana, ME Hossain, MK Hossain, AA Bhuiyan, 3D numerical analysis of the effect of various geometric parameters of EATHEs under steady condition, AIP Conference Proceedings 2121 (1), 040009, 2019.

Arafat Ahmed Bhuiyan, PhD

M Awais, Arafat A. Bhuiyan, Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers, International Journal of Heat and Mass Transfer, vol. 141: p. 580-603, 2019.

Arafat Ahmed Bhuiyan, PhD

MSR Chowdhury, AK Azad, MR Karim, J Naser, Arafat A. Bhuiyan, Reduction of GHG emissions by utilizing biomass co-firing in a swirl-stabilized furnace, Renewable Energy vol.143: p. 1201-1209, 2019.

Arafat Ahmed Bhuiyan, PhD

M Awais, Arafat A. Bhuiyan, Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): A parametric study, International Journal of Thermal Sciences, vol.140: p. 154-166, 2019.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, H Gurgenci, A Y Klimenko, "Seasonal variation on the performance of the dry cooled supercritical CO2 recompression cycle", Energy Conversion and Management 197 (2019): 111865. Impact factor-8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890419308477

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, H Gurgenci, A Y Klimenko, “Effect of Cooling System Design on the Performance of the Recompression CO2 Cycle for Concentrated Solar Power Application”, Energy 180 (2019): 480-494. Impact factor-6.08, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0360544219309880

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, H Gurgenci, A Y Klimenko, “Irreversibility and Exergy Analysis of a Recompression Supercritical CO2 Cycle Coupled with Dry Cooling System”, 4th Thermal and Fluids Engineering Conference (TFEC), April 14–17, 2019, Las Vegas, NV, USA.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “Performance Study of a Dry-Cooled supercritical CO2 Cycle Integrated with Solar Tower”, Asia Pacific Solar Research Conference, December 3-5, 2019, Canberra, Australia.

Prof. Dr. Md. Rezwanul Karim

AR Sarhan, MR Karim, ZK Kadhim, J Naser, Experimental investigation on the effect of vertical vibration on thermal performances of rectangular flat plate, Experimental Thermal and Fluid Science (2019), Vol. 101, pp.231-240. DOI: https://doi.org/10.1016/j.expthermflusci.2018.10.024 (Impact Factor: 3.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

2018 (33)

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U Patwari, Nuruzzaman Rakib, Mahmudul H. Pavel, Ahmed Y. Sanin, Asif Salman and Fahrial Alam, An Improvement in Welded Joint Using Vibration Assisted Arc Welding, ICOMM 2018, Australia.

Mr. Muhammad Awais

Awais M, Bhuiyan AA, Heat and mass transfer for compact heat exchanger (CHXs) design: A state-of-the-art review. International Journal of Heat and Mass Transfer, Elsevier. 2018; 127:359-80.

Prof. Dr. M. Ahsan Habib

M. A. Habib, Md. A. U Patwari, N. Rakib, M. H. Pavel, A. Y. Sanin, A. Salman and F. Alam, “An Improvement in Welded Joint Using Vibration Assisted Arc Welding” International Conference on Materials and Manufacturing (ICOMM 2018). Monash University, Melbourne, Australia, July 16-18, 2018.

Dr. Md. Anayet Ullah Patwari

Hibal Ahmed, Jebreel Muhammad, MuhammadHamza, Mustafa Kamal Anayet U Patwari [2018], Investigation of Surface Roughness by using the Vibration Assisted Milling Process of Glass Fiber Reinforced Polymer, Global journal of Researchers in Engineering, volume 18, issue 1.

Dr. Md. Anayet Ullah Patwari

A method for avoiding of chatter formation in machining operations”, Md. Anayet U Patwari, A.K.M. Nurul Amin

Prof. Dr. Md. Rezwanul Karim

MR Karim, J Naser, CFD modelling of combustion and associated emission of wet woody biomass in a 4 MW moving grate boiler, Fuel (2018), Vol. 222, pp. 656-674. DOI: https://doi.org/10.1016/j.fuel.2018.02.195 (Impact Factor: 7.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U Patwari, Nuruzzaman Rakib, Mahmudul H. Pavel, Ahmed Y. Sanin, Asif Salman and Fahrial Alam [2018], An Improvement in Welded Joint Using Vibration Assisted Arc Welding, MATEC web of Conferences, 221-04004-2018.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari,, Yahya Mohammad Alfakih, Ibrahim Bamnjo [2018],” Investigation of tool overhang length effects on machining responses during Turning Operation” International Journal of Engineering, volume-16, issue-2, pp1-4.

Prof. Dr. Md. Rezwanul Karim

M R Karim, AA Bhuiyan, J Naser, Effect of recycled flue gas ratios for pellet type biomass combustion in a packed bed furnace, International Journal of Heat and Mass Transfer (2018), Vol. 120, pp. 1031-1043. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.116 (Impact Factor: 5.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Madihah Binti Haji Maharof

Anang N.A., Abdullah L., Jamaludin Z., Maharof M., Chiew T.H. 2018. Design and Implementation of Cascade NP/PI Controller for Feed Table Ball Screw Driven Milling Machine. In: Hassan M. (eds) Intelligent Manufacturing & Mechatronics. Lecture Notes in Mechanical Engineering. Springer, Singapore.

Mr. Muhammad Awais

Awais M, Bhuiyan AA, Heat transfer enhancement using different types of vortex generators (VGs): A review on experimental and numerical activities. Thermal Science and Engineering Progress, Elsevier. 2018;5:524-45.

Mr. Md. Abdul Karim Miah

Md. Abdul Karim Miah, Ifat Rabbil Qudrat Ovi, Nasimul Eshan Chowdhury, Shorab Hossain, and Md. Nurul Absar Chowdhury. “Computational investigation of pulsatile blood flow through sinusoidal stenoses of varying lengths”. Journal of Engineering and Technology (JET), vol. 14, 2018

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AS Blicblau, AKMS Islam, J Naser, A review on thermo-chemical characteristics of coal/biomass co-firing in industrial furnace. Journal of Energy Institute, vol. 91(1): p.1-18, 2018.

Arafat Ahmed Bhuiyan, PhD

M Awais, Arafat A. Bhuiyan, Heat and mass transfer for compact heat exchanger (CHXs) design: A state-of-the-art review. International Journal of Heat and Mass Transfer, vol.127(C): p. 359-380, 2018.

Arafat Ahmed Bhuiyan, PhD

MR Karim, Arafat A. Bhuiyan, J Naser, Effect of recycled flue gas ratios for pellet type biomass combustion in a packed bed furnace. International Journal of Heat and Mass Transfer, vol. 120, p. 1031-1043, 2018.

Arafat Ahmed Bhuiyan, PhD

J Hart, Arafat A. Bhuiyan, J Naser, Aerodynamics of burner jet in a tangentially-fired boiler: A CFD modeling and experiment, International Journal of Thermal Sciences, vol.129: p.238-253, 2018.

Arafat Ahmed Bhuiyan, PhD

M Awais, Arafat A. Bhuiyan, Heat transfer enhancement using different types of vortex generators (VGs): A review on experimental and numerical activities. International Journal of Thermal Science and Engineering Progress, vol. 5: p.524-545, 2018.

Prof. Dr. Md. Rezwanul Karim

M R Karim, J Naser, Numerical study of the ignition front propagation of different pelletised biomass in a packed bed furnace, Applied Thermal Engineering (2018), Vol. 128, pp. 772-784. https://doi.org/10.1016/j.applthermaleng.2017.09.061 (Impact Factor: 6.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Mohammad Monjurul Ehsan

Salehin, Sayedus, M Monjurul Ehsan, Syed Rafat Faysal, and A K M Sadrul Islam. "Utilization of Nanofluid in Various Clean Energy and Energy Efficiency Applications." In Application of Thermo-fluid Processes in Energy Systems, pp. 3-33. Springer, Singapore, 2018. https://link.springer.com/chapter/10.1007/978-981-10-0697-5_1

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, A Y Klimenko, “A comprehensive review on heat transfer and pressure drop characteristics and correlations with supercritical CO2 under heating and cooling applications”, Renewable and Sustainable Energy Reviews 92 (2018) 658–675. Impact factor-12.34, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1364032118303241.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Zhiqiang Guan, A Y Klimenko, Xurong Wang, “Design and comparison of direct and indirect cooling system for 25MW solar power plant operated with supercritical CO2 cycle”, Energy Conversion and Management 168 (2018) 611–628. Impact factor-8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890418304205

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Xurong Wang, Zhiqiang Guan, A Y Klimenko, “Design and performance study of dry cooling system for 25MW solar power plant operated with supercritical CO2 cycle”, International Journal of Thermal Sciences 132 (2018) 398–410. Impact factor-3.89, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1290072917320367

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Sam Duniam, Andrew Lock, Yuchen Dai, Zhiqiang Guan, A Y Klimenko, H Gurgenci, “Cooling System design and Performance Analysis for a Supercritical CO2 Recompression Cycle”, 21st Australasian Fluid Mechanics Conference, 10-13 December 2018, Adelaide, Australia.

Dr. Mohammad Monjurul Ehsan

Yuchen Dai, Alexander Y Klimenko, Yuanshen Lu, M Monjurul Ehsan, “Numerical investigations on the effect of swirling plume on natural draft dry cooling towers”, 21st Australasian Fluid Mechanics Conference, 10-13 December 2018, Adelaide, Australia.

Dr. Mohammad Nasim

M. Nasim, A. Cernicchi, U. Galvanetto, The effect of human body positioning on neck injuries during compressive impacts, International Conference on Impact Loading of Structures and Materials, 2018, Xian, China.

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H., and Jamaludin, J. 2018, December. Damping of Disturbance Cutting Forces in Milling Cutting Process using State Estimator Controller Approach. In 2018 ICPE, The 8th International Conference on Postgraduate Education 2018 (ICPE 2018).

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H. and Jamaludin, J., 2018. Suppression on Effect of Cutting Forces towards Tracking Performance in Milling Cutting Process using Disturbance Force Observer. In: Hassan M. (eds), Intelligent Manufacturing & Mechatronics. Springer, Singapore.

Dr. Madihah Binti Haji Maharof

M Maharof, Z Jamaludin, M Minhat, L Abdullah, NA Anang, TH Chiew, J Jamaludin, and T Tjahjowidodo, 2018. Suppression of Cutting Forces using Combined Inverse Model Based Disturbance Observer and Disturbance Force Observer. Journal of Advanced Manufacturing Technology, 12(1).

Dr. Madihah Binti Haji Maharof

NA Anang, L Abdullah, Z Jamaludin, M Maharof, MH Nordin, 2018. Robust Motion Controller Design for Precise Tracking of Ball Screw Driven Positioning System. Journal of Advanced Manufacturing Technology, 12(1-4), pp. 73-86.

Dr. Madihah Binti Haji Maharof

NA Anang, L Abdullah, Z Jamaludin, TH Chiew, M Maharof, SNS Salim, and Z Retas, 2018. Analysis of Nonlinear PID Controller for Tracking Performance of Ball Screw Drive. Journal of Telecommunication, Electronic and Computer Engineering, 10(2), pp. 67-71.

Dr. Madihah Binti Haji Maharof

Anang, N. A., Abdullah, L., Jamaludin, Z., Maharof, M., Chiew, T. H., 2018. Intelligent Manufacturing & Mechatronics. Proceedings of Symposium, Pekan, Pahang, Malaysia, pp. 85-91.

2017 (30)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Firoz Mahmud, Md. Minhazul Islam [2017] “Improvement of Surface Profile of Different Materials by Hot Air in Turning Process” ICMIME, RUET 2017.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Saiful Islam, Md. Sayeed Ul Hasan [2017] “Development of a thermo-acoustic device for cooling effect in machining processes” ICMIME, RUET 2017.

Prof. Dr. M. Ahsan Habib

M. Islam, F. Mahmud, M. A. Habib, Md. A. U. Patwari, “Improvement of Surface Profile of Different Materials by Hot Air in Turning Process” 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) at: RUET, Rajshahi, Bangladesh.

Prof. Dr. M. Ahsan Habib

S. U. Hasan, Md. A. U. Patwari, M. A. Habib, S. Islam, “Development of Thermo Acoustic Device for Cooling Effect in Machining Process” 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) at: RUET, Rajshahi, Bangladesh

Mr. Sayedus Salehin

Sayedus Salehin, M Monjurul Ehsan, Syed Rafat Faysal, A K M Sadrul Islam, “Utilization of Nanofluid in Various Clean Energy and Energy Efficiency Applications”, in M M K Khan, AA Chowdhury and Nur M S Hassan eds. ‘Application of Thermo-fluid Processes in Clean Energy Technologies: Key Issues and Recent Developments for a Sustainable Future’, pp: 3-33, Springer, Singapore (ISBN: 978-981-10-0695-1) (October 2017) [https://link.springer.com/chapter/10.1007/978-981-10-0697-5_1]

Mr. Sayedus Salehin

Habibullah, Mohammad, Khizir Mahmud, Günnur Koçar, AKM Sadrul Islam, and Sayedus Salehin, "Economic challenges of hybrid microgrid: An analysis and approaches for rural electrification", 7th BSME International Conference on Thermal Engineering, 22–24 December 2016, Dhaka, Bangladesh. In AIP Conference Proceedings, vol. 1851, no. 1, p. 020043. AIP Publishing, 2017 [https://aip.scitation.org/doi/abs/10.1063/1.4984672]

Mr. Chowdhury Sadid Alam

T.M. Abir Ahsan, Chowdhury Sadid Alam, Md. Mustafizur Rahman, A. K. M. Sadrul Islam, 2017, “Solar Chimney for Natural Ventilation: A Review”, AIP Conference Proceedings, 1851(1).

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud 1, Md. Minhazul Islam , “Investigation of surface parameters during hot air streaming turning process of mild steel” AIP Proceedings. June 2017.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Tanzib Ehsan, Md Golam Ahnaf, S.I. Chowdhury[2017], Innovative Green Cooling Approach Using Peltier Chip in Milling Operation for Surface Roughness Improvement, ICMSE, Istanbul, Turkey

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Tanzib Ehsan, Md Golam Ahnaf, S.I. Chowdhury, [2017] “Innovative Green Cooling Approach Using Peltier Chip in Milling Operation for Surface Roughness Improvement”, International Journal of Industrial and manufacturing Engineering, Volume: 4, Issue 7,

Dr. A. R. M. Harunur Rashid

Hasanuzzaman, M., Rashid, A., and Olabi, A., Characterization of Porous Glass and Ceramics by Mercury Intrusion Porosimetry, Reference Module in Materials Science and Materials Engineering, Elsevier; pp. 1-9, 2017.

Mr. Sayedus Salehin

Syed Shaheer Uddin Ahmed, Sayedus Salehin, M Mustafizur Rahman, A K M Sadrul Islam, “Harvesting Solar Energy: Fundamentals and Applications”, in P. Mondal, A.K. Dalai eds. ‘Sustainable Utilization of Natural Resources’, pp: 381-416, CRC Press, 2017 (ISBN: 978-1-4987-6183-3) (March 2017) [https://www.taylorfrancis.com/books/e/9781315153292/chapters/10.1201/9781315153292-13]

Prof. Dr. Md. Rezwanul Karim

MR Karim, Jamal Naser, Numerical modelling of solid biomass combustion: difficulties in initiating the fixed bed combustion, Energy Procedia (2017), Vol. 110, pp. 390-395. DOI: https://doi.org/10.1016/j.egypro.2017.03.158 (Impact Factor: 2.63, Elsevier, Scopus Indexed Journal)

Dr. Mohammad Nasim

M. Nasim, M. Brasca, S.F. Khosroshahi, U. Galvanetto, Understanding the impact properties of polymeric sandwich structures used for motorcyclists' back protectors, Polymer Testing; 61: 249-257 (2017). dx.doi.org/10.1016/j.polymertesting.2017.05.025

Dr. A. R. M. Harunur Rashid

Ashraf, S., Mahmud, M., Akram, M., Rashid, A., Rahman, M., and Tanvir, M., The Practice of Kaizen Tool in the Apparel Industry of Bangladesh for Process Improvement and Development of Ergonomics Standard, International Research Journal of Engineering and Technology (IRJET) , Volume 4, Issue 10 , S.NO: 323, pp 1747 – 1754, 2017.

Mr. Sayedus Salehin

Md. Mustafizur Rahman, Sayedus Salehin, Syed Shaheer Uddin Ahmed, A K M Sadrul Islam, “Environment Impact Assessment of Different Renewable Energy Resources: A Recent Development”, in M G Rasul, A K Azad and S Sharma eds. ‘Clean Energy for Sustainable Development: Contrasts and New Approaches’, pp: 29-71, Academic Press, Elsevier (January 2017) [https://www.sciencedirect.com/science/article/pii/B9780128054239000028]

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AS Blicblau, J Naser, Co-firing of biomass and slagging in industrial furnace: A review on modelling approach. Journal of the Energy Institute, vol.90(6): p.838-854, 2017.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J Naser, Development of 3D transient wall filming mechanism during combustion by coupling Eulerian-Lagrangian approach and particle-wall interaction model. Applied Thermal Engineering, vol. 112: p. 911923, 2017.

Dr. Madihah Binti Haji Maharof

Anang, N. A., Abdullah, L., Jamaludin, Z., Chiew, T. H., Maharof, M., Salim, S. N. S., Retas, Z., and Junoh, S. C. K., 2017. Tracking Performance of NPID Controller for Cutting Force Disturbance of Ball Screw Drive. Journal of Mechanical Engineering and Sciences, 11(4), pp. 3227-3239.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Salehin, M, Islam, A K M Sadrul Islam “Investigation of thermal and hydrodynamic behavior of Al2O3-water nanofluid through a rough parallel plate”, Volume 14, Issue 3 pp. 4432-4447 September 2017, International Journal of Automotive and Mechanical Engineering, Universiti Malaysia Pahang Publishing, Malaysia. (Scopus Indexed Journal). https://doi.org/10.15282/ijame.14.3.2017.4.0351

Dr. Mohammad Monjurul Ehsan

Salehin, Musfequs, M Monjurul Ehsan, and A K M Sadrul Islam. "Heat transfer enhancement and pumping power optimization using CuO-water nanofluid through rectangular corrugated pipe." AIP Conference Proceedings. Vol. 1851. No. 1. AIP Publishing, USA, 2017. (Scopus Indexed Journal). https://aip.scitation.org/doi/abs/10.1063/1.4984725

Dr. Mohammad Monjurul Ehsan

M Salehin, M Monjurul Ehsan, A K M Sadrul Islam, “Performance Evaluation of Nanofluid for Heat Transfer Enhancement and Pumping Power Reduction through a Semicircular Corrugated Pipe”. AMSE JOURNALS-AMSE IIETA publication-2017-Series: Modelling, Measurement and Control B; Canada, Vol. 86; No-1; pp 296-311. (Scopus Indexed Journal). http://iieta.org/sites/default/files/Journals/MMC/MMC_B/86.01_20.pdf

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Xurong Wang, Zhiqiang Guan, A Y Klimenko, “Modeling of A Dry Cooling Unit Operated with Supercritical CO2 in 25 MW NDDCT”, Proceedings of 88th IASTEM International Conference, 4-5 November, 2017, Sydney, Australia. (Excellent paper award).

Dr. Mohammad Monjurul Ehsan

Salehin, Musfequs, M Monjurul Ehsan, and A K M Sadrul Islam. "Heat transfer enhancement and pumping power optimization using CuO-water nanofluid through rectangular corrugated pipe", 7th BSME International Conference on Thermal Engineering, December, 2017, Dhaka, Bangladesh.

Dr. Mohammad Nasim

M. Nasim, M.A. Karim, S.I. Khan, M.H. Noor, Decision tree based approach to control the efficiency of a hybrid PV/T solar system in Bangladesh, Distributed Generation & Alternative Energy Journal; 32: 17-48 (2017). doi.org/10.1080/21563306.2017.11824267.

Dr. Madihah Binti Haji Maharof

Chiew, T.H., Jamaludin, Z., Bani Hashim, A.Y., Abdullah, L., Rafan, N.A., Maharof, M. 2017. Second Order Sliding Mode Control for Direct Drive Positioning System. Journal of Mechanical Engineering and Sciences 11(4), pp. 3206.

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H., and Jamaludin, J., 2017. Design and Analysis of Disturbance Force Observer for Milling Cutting Force Compensation. International Journal of Mechanical and Mechatronics Engineering,17(5), pp. 53-59.

2016 (52)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud 1, Md. Minhazul Islam , “Investigation of surface parameters during hot air streaming turning process of mild steel” Paper ID 173, ICTE, BSME 2016.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Tanzib Ehsan Sanglap, Md. Golam Ahnaf, AA Mahmud Hasan, “Investigation Of The Effect Of Vibration Frequency On Surface Roughness During The Milling Process Of Preheated Mild Steel Plate” Paper ID 215, ICTE, BSME 2016.

Prof. Dr. M. Ahsan Habib

Md. A. U. Patwari, M. A. Habib, Md. T. Ehsan, Md G. Ahnaf, M. Hasan, “Investigation Of The Effect Of Vibration Frequency On Surface Roughness During The Milling Process Of Preheated Mild Steel Plate”, 7th BSME International Conference on Thermal Engineering, December 2016, Dhaka, Bangladesh.

Prof. Dr. M. Ahsan Habib

A. U. Patwari, M. A. Habib, Md. F. Mahmud, and Md. M. Islam, “Investigation of surface parameters during hot air streaming turning process of mild steel”, AIP Conference Proceedings, 1851, 020072, (2017), 7th BSME International Conference on Thermal Engineering, December 2016, Dhaka, Bangladesh.

Dr. Md. Anayet Ullah Patwari

Md Anayet Ullah Patwari, Suleiman Mohammed Yusuf, Mohammad Ahsan Habib, Shahrair Ragib, Ferdous Azam [2016], “Investigation of Quality of Drilled Holes by Guiding the Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material”, Journal of Applied Mechanics and Materials, Volume 860, p.64-69.

Dr. Md. Anayet Ullah Patwari

Md Anayet Ullah Patwari, Md K. Bashar, Mohammad Ahsan Habib, Abdul Aziz, Mahfuz Alam [2016], “Development of a Passive Damping Tool Holder for the Improvement of Surace Roughness in Turning Operation of Stainless Steel” Journal of Applied Mechanics and Materials, Volume 860, p.70-p73.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, Adib Bin Rashid, Md. S.I. Chowdhury, Md. H Rashid, G R Mumtaz, (2016), “Comparison and CFD verification of binder effects in sand mould casting of aluminum alloy”.-Volume 16. Issue 1, page: 143-146, International journal of Engineering, Romania.

Mr. Sayedus Salehin

Sayedus Salehin, MT Ferdaous, RM Chowdhury, Sumaia S Shithi, MSR Bhuiyan Rofi, Mahir A Mohammed, "Assessment of Renewable Energy Systems combining Techno-Economic Optimization with Energy Scenario Analysis", Energy 112 (2016): 729-741, Pregamon (October 2016) [https://www.sciencedirect.com/science/article/abs/pii/S0360544216308842]

Dr. Md. Anayet Ullah Patwari

Md Anayet Ullah Patwari, Md Shariful Islam Chowdhury, Mohammad Ahsan Habib, Afzal Hossain Neelav, Md Sharfat Latif, T.M. Moniruzzaman Sunny [2016], “Tool Life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel”, Journal of Applied Mechanics and Materials, Volume 860, p.58-63.

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, “Optimization of surface roughness in drilling of GFRP composite using harmony search algorithm” Proceedings of ICITM 2016, France

Dr. Md. Zahid Hossain

Fahim Mahmud Khan, Md Shahriar Islam, Md Zahid Hossain, ‘‘Design Aspects of an Excavator Arm’’, International Review of Mechanical Engineering (IREME), Vol. 10, No. 6, Pp 437-442, September, 2016

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md Anayet Ullah Patwari, Ahmad Syed Anwar, Sakib Shadman, Oneeruddho Hussain Abir [2016], “3D CFD Based Optimization Technique for Muffler Design of a Motorcycle”, Journal of Applied Mechanics and Materials, Volume 860, p.52-57.

Prof. Dr. Md. Rezwanul Karim

MM Rahman, JT Hart, AA Bhuiyan, M R Karim, J Naser, Experimental and numerical investigation of coherent structure dynamics on mass transfer in a separated cavity flow, Experimental Thermal and Fluid Science (2016), Vol.76, pp. 146-162. DOI: https://doi.org/10.1016/j.expthermflusci.2016.03.028 (Impact Factor: 3.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Prof. Dr. Md. Rezwanul Karim

JT Hart, M R Karim, AA Bhuiyan, P Witt, J Naser, Numerical modelling of unsteady flow behaviour in the rectangular jets with oblique opening, Alexandria Engineering Journal (2016), Vol. 55 (3), pp. 23092320. DOI: https://doi.org/10.1016/j.aej.2016.05.008 (Impact Factor: 6.8, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2016), “Investigation of the Effects of Smart Ultrasound Wave on Surface Roughness during Turning Operation of Mild Steel” Volume: XVI, 765-771, issue 4; Journal of Manufacturing Technology.

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Ahmad S Anwar, Md. Anayet U. Patwari (2016), “An Innovative Technique to improve muffler performance using automated mechanical iris-Volume 11, Issue 2, ARPN Journal of Engineering and Applied Sciences.

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., and Minhat, M., 2016. Design and Analysis of Cascade P/PI Controller for XY Milling Table Ballscrew Driven System. Proceedings of Innovative Research and Industrial Dialogue (IRID’16), pp. 115-116.

Prof. Dr. Md. Rezwanul Karim

AA Bhuiyan, M R Karim, JT Hart, PJ Witt, J Naser, Investigation of Slot-Burner Aerodynamics with Recessed-Type Nozzle Geometry, Fluids (2016), Vol. 1 (2), p.10. DOI: https://doi.org/10.3390/fluids1020010 (Impact Factor: 1.9, MDPI, Q2 Ranked, ISI/Scopus Indexed Journal)

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Akib Jabed, and M. Nabil Bhuiyan, "Optimization of Surface Roughness in Drilling of GFRP Composite Using Harmony Search Algorithm," International Journal of Mechanical Engineering and Robotics Research, Vol. 5, No. 4, pp. 311-316, October 2016. DOI: 10.18178/ijmerr.5.4.311-316

Mr. Sayedus Salehin

Md. Mustafizur Rahman, A.K.M. Sadrul Islam, Sayedus Salehin, Md. Abdullah Al-Matin "Development of a Model for Techno-economic Assessment of a Stand-alone Off-grid Solar Photovoltaic System in Bangladesh ", International Journal of Renewable Energy Research, Vol. 6 (1), 2016, pp. 140-149. (March 2016) [https://www.ijrer.org/ijrer/index.php/ijrer/article/view/3254]

Prof. Dr. M. Ahsan Habib

M. A. Habib, Md. A. U. Patwari, A. Jabed and M. N. Bhuiyan, “Optimization of surface roughness in drilling of GFRP composite using harmony search algorithm” 5th International Conference on Industrial Technology and Management (ICITM 2016), March 17-18, 2016 in Paris, France.

Dr. Madihah Binti Haji Maharof

Maharof, M., Ito, T., Jamaludin, Z., Watanabe, T. 2016. Development of local interaction module for ARM-COMS. The Proceedings of Conference of Chugoku-Shikoku Branch, 503, pp. 1-2.

Dr. Md. Zahid Hossain

Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed, ‘‘A COMPARATIVE STUDY BETWEEN DIFFERENT HELMHOLTZ RESONATOR SYSTEMS’’ Journal of Canadian Acoustics Vol. 44, No. 4, Pp 12-17, 2016

Dr. Mohammad Monjurul Ehsan

61. M Monjurul Ehsan, “Shock Wave Decay Phenomenon in Open Atmosphere”, International Research Journal of Engineering and Technology (IRJET), Volume-03, Issue: 06, June-2016, e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Fast Track Publications, India. Impact Factor-7.52.

Arafat Ahmed Bhuiyan, PhD

JT Hart, MR Karim, Arafat A. Bhuiyan, P Witt, J Naser, Numerical modeling of unsteady flow behavior in the rectangular jets with oblique opening. Alexandria Engineering Journal, vol. 55(3): p. 2309-2320, 2016.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, Thermal and hydraulic performance of finned-tube heat exchangers under different flow ranges: A review on modeling and experiment. International Journal of Heat and Mass Transfer, vol. 101: p. 38-59, 2016.

Arafat Ahmed Bhuiyan, PhD

MM Rahman, JT Hart, Arafat A. Bhuiyan, MR Karim, J Naser, Experimental and numerical investigation of coherent structure dynamics on mass transfer in a separated cavity flow. Experimental Thermal and Fluid Science, vol. 76: p. 146-162, 2016.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J Naser, Thermal characterization of coal/straw combustion under air/oxy-fuel conditions in a swirl-stabilized furnace: a CFD modeling. Applied Thermal Engineering, vol. 93: p. 639-651, 2016.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, MH Banna, SF Barna, MR Amin, AKMS Islam, Numerical modeling of thermal characteristics in a microstructure filled porous cavity with mixed convection. International Journal of Heat and Mass Transfer, vol. 93: p. 464-476, 2016.

Arafat Ahmed Bhuiyan, PhD

ASM Ashab, D Ruan, G Lu, Arafat A. Bhuiyan, Finite Element Analysis of Aluminum Honeycombs Subjected to Dynamic Indentation and Compression Loads. Materials, vol. 9(3): p. 162, 2016.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, MR Karim, JT Hart, P Witt, J Naser, Investigation of Slot-Burner Aerodynamics with Recessed-Type Nozzle Geometry. Fluids, Journal of Multi-Disciplinary Publishing Institute (MDPI), vol. 1(2): p. 10, 2016.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J Naser, Modeling of slag deposition and flow characteristics of coal combustion under oxy-firing condition in a 550 MW tangentially fired furnace. Applied Thermal Engineering, vol. 106: p. 221-235, 2016.

Mr. Sayedus Salehin

Shitab Ishmam, Wasel Rahman, Shabab Bin Karim, Sayedus Salehin, A.K.M. Sadrul Islam, "From Strain to Extraction- A Review to Produce Biodiesel from Microalgae in Bangladesh", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421484]

Mr. Sayedus Salehin

Md. Mustafizur Rahman, Sayedus Salehin, A.K.M. Sadrul Islam, "Economic and Environmental Assessments of Solar Home Systems in Bangladesh", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421473/]

Mr. Sayedus Salehin

Sayedus Salehin, A.K.M. Sadrul Islam, A.N.M. Zobayer, "Reduction of Cooking Energy and CO2 emission using Heat Retention Cooker for Rice Cooking", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421488/]

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam, “Application of nanofluid in heat exchangers for energy savings”, in M. Masud Khan, Nur Md. Sayeed Hassan eds. ‘Thermofluids Modeling for Energy Efficiency Applications’, Academic Press Inc, Elsevier. (ISBN: 9780128023976). https://www.sciencedirect.com/science/article/pii/B978012802397600004X

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam (2016), “Study of turbulent convective heat transfer enhancement by Al2O3-water nanofluid through a rough circular tube”. Applied Mechanics and Materials, Vol. 819, pp. 341-345, Trans Tech Publications Ltd, Switzerland. (Scopus Indexed Journal). https://www.scientific.net/AMM.819.341

Dr. Mohammad Monjurul Ehsan

Salehin, S, M Monjurul Ehsan, Noor, S, & Sadrul Islam, A K M (2016). “Modeling of an optimized hybrid energy system for Kutubdia Island, Bangladesh”. In Applied Mechanics and Materials (Vol. 819, pp. 518-522). Trans Tech Publications. (Scopus Indexed Journal). https://www.scientific.net/AMM.819.518

Dr. Mohammad Monjurul Ehsan

M Salehin, M Monjurul Ehsan, A Mehmood, M Awais, M Usman, “Investigation of TiO2-Water Nanofluid Behavior Through a Wavy Corrugated Pipe in Terms of Heat Transfer and Pumping Power”, International Journal of Mechanical and Production Engineering (IJMPE), ISSN: 2320-2092, Volume- 4, Issue-8, Aug.-2016, IRAJ Publishing house, India. http://www.iraj.in/journal/journal_file/journal_pdf/2-281-147376107335-40.pdf

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Shafi Noor, “Investigation of Thermo-Fluid Behaviour of Nanofluid Through a Corrugated Tube”, International Journal of Research in Engineering and Technology (IJRET), Vol-05 Iss-07, Jul-2016, eISSN: 2319-1163 | pISSN: 2321-7308, eSAT Publishing House, India. (Scopus Indexed Journal). https://ijret.org/volumes/2016v05/i07/IJRET20160507063.pdf

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Shafi Noor, “Study of Heat Transfer Performance and Pumping Power Improvement of Nanofluid through a Rough Circular Tube”, International Research Journal of Engineering and Technology (IRJET), Volume-03, Issue: 06, June-2016, e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Fast Track Publications, India. (Scopus Indexed Journal). https://www.irjet.net/archives/V3/i6/IRJET-V3I6320.pdf

Dr. Mohammad Monjurul Ehsan

M Salehin, M Monjurul Ehsan, A Mehmood, M Awais, M Usman, “Investigation of TiO2-Water Nanofluid Behavior Through a Wavy Corrugated Pipe in Terms of Heat Transfer and Pumping Power”, Proceedings of 38th The IRES International Conference, 3rd June 2016, ISBN: 978-93-86083-24-1, Singapore.

Dr. Madihah Binti Haji Maharof

Jamaludin, Z., Jamaludin, J., Chiew, T.H., Abdullah, L., Rafan, N.A., Maharof, M. 2016. Sustainable Cutting Process for Milling Operation using Disturbance Observer. Procedia CIRP 40, pp. 486-491.

2015 (47)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Suleimen Md. Yusuf, Mohammad Ahsan Habib, Shariar ragib, Ferdous, Investigation of Quality of Drilled Holes by Guiding Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material Abstract book of ICMME 2015.

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Ahmad S Anwar (2015), 3D CFD based optimization technique for muffler design of a motorcycle” ICMME 2015, Dhaka, Bangladesh.

Dr. Md. Anayet Ullah Patwari

Anayet Ullah Patwari, Md. Shariful Islam Chowdhury, Mohammad Ahsan Habib, Afzal Hossain Neelav, Md. Sharfat Latif, T. M. Moniruzzaman Sunny (2015) “Improvement of Tool life by Externally Applied Ultrasonic Waves during Turning Operation of Mild Steel” Accepted to ICMME 2015.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Khairul Basar, Mohammad Ahsan Habib, Abdul Aziz, Mahfuz Alam, “Development of a passive damping tool holder for the improvement of surface profile in turning operation of stainess steel” Abstract book of ICMME 2015.

Mr. Sayedus Salehin

Sayedus Salehin, Md. Mustafizur Rahman, A.K.M. Sadrul Islam "Techno-economic Feasibility Study of a Solar PV-Diesel System for Applications in Northern Part of Bangladesh ", International Journal of Renewable Energy Research , Vol. 5 (4), 2015, pp. 1220-1229 (December 2015) [www.ijrer.org/ijrer/index.php/ijrer/article/viewFile/3022]

Prof. Dr. M. Ahsan Habib

M. A. Habib, Md. A. U. Patwari, A. S. Anwar, S. Shadman, O. H. Abir “3D CFD based optimization technique for muffler design of a motorcycle”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Prof. Dr. M. Ahsan Habib

A. U. Patwari, Md. S.I. Chowdhury, M. A. Habib, A. H. Neelav, S. L. Sezan, T. M. M. Sunny, " Tool life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel ", 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Prof. Dr. M. Ahsan Habib

Md. A. U. Patwari, S. M. Yusuf, M. A. Habib, S. Ragib and F. Azam, “Investigation of Quality of Drilled Holes by Guiding The Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Prof. Dr. M. Ahsan Habib

Md. A. U Patwari, Md. K. Bashar, M. A. Habib, A. Aziz, M. Alam, “Development of a Passive Damping Tool Holder for The Improvement of Surface Roughness in Turning Operation of Stainless Steel”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Dr. Md. Zahid Hossain

Najmul Hossain, Md. Shahriar Islam, KH Nazmul Ahsan, Md. Zahid Hossain, Effects on natural frequency of a plate due to distributed and positional concentrated mass, Journal of Vibroengineering (JVE), Vol. 17, issue 7, Nov, 2015

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Ahmad S Anwar (2015), “An Innovative Technique to improve muffler performance using automated mechanical iris submitted to the 2nd International Conference on Mechanical Engineering – ICOME 2015.

Mr. Sayedus Salehin

M.M. Ehsan, Shafi Noor, Sayedus Salehin, A.K.M. Sadrul Islam, “Application of nanofluid in heat exchangers for energy savings”, in M. Masud Khan, Nur Md. Sayeed Hassan eds. ‘Thermofluids Modeling for Energy Efficiency Applications’, Academic Press Inc, Elsevier. (ISBN: 9780128023976) (September 2015) [https://www.sciencedirect.com/science/article/pii/B978012802397600004X]

Prof. Dr. M. Ahsan Habib

M. A. Habib, A. S. Anwar, Md. A. U. Patwari, “An Innovative Concept to Improve the Muffler Performance Using Automated Mechanical IRIS”, 2nd International Conference on Mechanical Engineering – ICOME 2015, September 3-5, 2015, Patra Jasa, Bali – Indonesia

Prof. Dr. Md. Rezwanul Karim

AA Bhuiyan, MR Karim, J Naser, Chapter 11- Modeling of solid and bio-fuel combustion technologies, Thermofluid Modeling for Energy Efficiency Applications (2016) pp. 259-309.

Prof. Dr. M. Ahsan Habib

A. U. Patwari, M. A. Habib, Md. S. I. Chowdhury , A. H. Neelav , Md. S. Latif, T. M. M. Sunny, “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”, 4th International Conference on Advances in Mechanical Engineering (ICAME 2015), Patra Jasa Bali, Indonesia (26 Aug - 27 Aug, 2015)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2015), “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”–Abstract book of ICAME 2015,

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2015), “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”–Volume 76 Issue 6, Page 103-104, jurnal Teknologi.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Ahsan Habib, S.I Chowdhury, Rana M Hassain Akram; “ Thermal investigation of Vortex Generated Green Coolant on surface texture for Drilling Process”- Elservier procedica; (2015), DOI: 10.1016/j.proeng.2015.05.075.

Dr. Md. Zahid Hossain

Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed, ‘‘Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators’’, International Review of Mechanical Engineering (IREME), Vol. 9, No. 3, Pp 231-236, May, 2015.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, N.A. Chowdhury, M. D. Arif, S.I Chowdhury (2015), “Effect of different electrode shape on surface roughness of mild steel during EDM” ACTA TECHNICA CORVINIENSIS, Volume 8, Issue-2, Romania.

Dr. Md. Zahid Hossain

Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed "Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points" International journal of advancements in mechanical and aeronautical engineering, Vol. 2(1), Pp 73-81, 2015.

Mr. Sayedus Salehin

Francesco Fuso Nerini, Francesco Valentini, Anish Modi, Govinda Upadhyay, Muditha Abeysekera, Sayedus Salehin, Eduardo Appleyard " The Energy and Water Emergency Module; A containerized solution for meeting the energy and water needs in protracted displacement situations." Energy Conversion and Management 93 (2015): 205-214, Elsevier (March 2015) [https://www.sciencedirect.com/science/article/pii/S0196890415000230]

Mr. Md. Abdul Karim Miah

Shishir, S. S., Miah, M. A. K.,Islam, A. S., Hasan, A. T. (2015). Blood Flow Dynamics in Cerebral Aneurysm-A CFD Simulation. Procedia Engineering, 105, 919-927

Prof. Dr. M. Ahsan Habib

Anayet U. Patwari, M. A. Habib, Md. S.I. Chowdhury, R. Md. H. Akram “Thermal Investigation of Vortex Generated Green Coolant on Surface Texture for Drilling Process”, 6th BSME International Conference on Thermal Engineering 2015, Dhaka, Bangladesh.

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Koushik Alam Khan and A. N. M. Amanullah Tomal (2015) “Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM” Advanced Materials Research Vol. 1101 (2015) pp 393© (2015) Trans Tech Publications, Switzerland Accepted: 07.01.2015 doi:10.4028/www.scientific.net/AMR.1101.393.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J. Naser, Computational modeling of co-firing of biomass with coal under oxy-fuel condition in a small scale furnace. Fuel, vol. 143: p. 455-466, 2015.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J. Naser, Numerical modeling of oxy fuel combustion, the effect of radiative and convective heat transfer and burnout. Fuel, vol. 139: p. 268-284, 2015.

Dr. Md. Zahid Hossain

Md. Amin Mahmud , Md. Zahid Hossain, Md. Shahriar Islam, Mir Md. Maruf Morshed ‘‘Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators’’, Proceedings of 10th Global Engineering, Science and Technology Conference 2-3 January, 2015, BIAM Foundation, Dhaka, Bangladesh

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, MR Amin, J Naser, AKMS Islam, Effects of geometric parameters for wavy finned-tube heat exchanger in turbulent flow: a CFD modeling. Frontiers in Heat and Mass Transfer (FHMT), vol. 6(1), 2015.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and J. Naser, A CFD modelling of radiative performance in co-firing of biomass with Victorian brown coal in industrial furnace, in 11th International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia. 2015.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Finite volume modelling (FVM) of straw particles combustion in a 30kW swirl?stabilized furnace under different oxidizing environments, in International Conference on Mechanical Engineering (ICME), BUET, Bangladesh. 2015.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Characterization of emissions measure and thermal performance of coal?water slurry combustion under O2/N2 and O2/CO2 conditions, in International Conference on Mechanical Engineering (ICME), BUET, Bangladesh, 2015.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and J. Naser, Modeling of slagging in industrial furnace: A comprehensive review, Procedia Engineering, 105(0): p. 512?519, 2015.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and J. Naser, Numerical modeling of biomass cocombustion with pulverized coal in a small-scale furnace, Procedia Engineering, 2015. 105(0): p. 504?511.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, MR Karim, and J. Naser, Modeling of solid and bio-fuel combustion technologies. Thermo-fluid modeling for Energy Efficiency Applications; Khan, MMK, Hassan, NMS, Eds, 2015: p. 259-309.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, J. Naser, CFD modeling of co-firing of biomass with coal under oxy-fuel combustion in a large scale power plant. Fuel, vol. 159: p. 150-168, 2015.

Dr. Mohammad Monjurul Ehsan

Shafi Noor, M Monjurul Ehsan, M S Mayeed, A K M Sadrul Islam, “Convective Heat Transfer and Pumping Power for The Flow Through Corrugated Channel Using Nanofluid”, ASME Proceedings of IMECE15, ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2015, Texas, USA.

Dr. Mohammad Nasim

M.A. Karim, M.H. Noor, M. Nasim, S.I. Khan, Assessment of a simplified model of a wave energy converter in terms of hydraulic mechanical and electrical parameters, International Journal of Energy and Power Engineering; 4: 94-102 (2015). doi.org/10.11648/j.ijepe.20150402.20

Dr. Mohammad Nasim

M. Nasim, M. Brasca, A. Cernicchi, E. Silani, Standards in PPE, A survey, 2015. https://drive.google.com/file/d/1_O3UF7uRL76fnCI9kFVaCzqoyo8dVSCS/view

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., Minhat, M., and Ito, T., 2015. Review on Cutting Force Compensation Techniques for Machine Tools Application. Applied Mechanics and Materials, 761, pp. 250-254.

2014 (39)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Ahsan Habib, S.I Chowdhury, Rana M Hassain Akram; “ Thermal investigation of Vortex Generated Green Coolant on surface texture for Drilling Process” Proceedings of 6th BSME international conference on thermal engineering (CD Version),, 21-23 December 2014, Dhaka, Bangladesh.

Mr. Sayedus Salehin

Hazim Moria, Sayedus Salehin, Mohammed N. Alghamdi, A.K.M. Sadrul Islam, “Assessment of Wind Characteristics and Electricity Generation Potential for Yanbu, Saudi Arabia”, in the proceeding of19th Australasian Fluid Mechanics Conference (AFMC), December 8-11, 2014,RMIT Univ., Melbourne, Australia, 2014 [http://people.eng.unimelb.edu.au/imarusic/proceedings/19/249.pdf]

Mr. Sayedus Salehin

Shafi Noor, M. M. Ehsan, Sayedus Salehin, A.K.M. Sadrul Islam, “Heat transfer and pumping power using nanofluid in a corrugated tube”, in the proceeding of 19th Australasian Fluid Mechanics Conference (AFMC), December 8-11, 2014, RMIT Univ., Melbourne, Australia, 2014 [http://people.eng.unimelb.edu.au/imarusic/proceedings/19/522.pdf]

Mr. Sayedus Salehin

Felix Nickel, Thomas Haas, Eduard Wegner, Daniel Bahro, Sayedus Salehin, Oliver Kraft, Patric A. Gruber, Alexander Colsmann, "Mechanically robust, ITO-free, 4.8% efficient, all-solution processed organic solar cells on flexible PET foil", Solar Energy Materials and Solar Cells 130 (2014): 317-321.Elsevier (November 2014) [https://www.sciencedirect.com/science/article/pii/S0927024814003559]

Prof. Dr. M. Ahsan Habib

M. A. Habib, Md. A. U. Patwari, K. A. Khan and A. N. M. A. Tomal, "Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM", 2nd International Conference on Mechatronics, Automation and Manufacturing (ICMAM 2014), Oct. 24-25, 2014, Beijing, China.

Dr. Md. Anayet Ullah Patwari

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Koushik Alam Khan and A. N. M. Amanullah Tomal (2015) “Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM” Abstract book of ICMAM 2014 , Beijing, China, October 2014

Mr. Sayedus Salehin

Rashid Ahammed Ferdaus, Mahir Asif Mohammed, Sanzidur Rahman, Sayedus Salehin and Mohammad Abdul Mannan, “Energy Efficient Hybrid Dual Axis Solar Tracking System", Journal of Renewable Energy, Hindawi (July 2014) [https://www.hindawi.com/journals/jre/2014/629717/]

Mr. Sayedus Salehin

Sayedus Salehin, A.K.M. Sadrul Islam, Rawhatul Hoque, Musfiqur Rahman, Aynul Hoque, Emrul Manna, "Optimized Model of A Solar-Biogas-Diesel Hybrid Energy System for Adorsho Chor island, Bangladesh", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861692/]

Mr. Sayedus Salehin

Ihteaz Muhaimeen Hossain, S.M.Ferdous, Sayedus Salehin, "Pump-as-Turbine (PAT) for Small Scale Power Generation: A Comparative Analysis", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861698/]

Mr. Sayedus Salehin

Taskin Jamal, Weerakorn Ongsakul, Jay Govind Singh, Sayedus Salehin, S.M. Ferdous, "Potential Rooftop Distribution Mapping using Geographic Information Systems (GIS)for Solar PV Installation : A Case Study for Dhaka, Bangladesh", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861648/]

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, MR Amin, MR Karim and AKMS Islam, Plate fin and tube heat exchanger modeling: Effects of performance parameters for turbulent flow regime. International Journal of Automotive and Mechanical Engineering, vol. 9(1): p. 1768-1781, 2014.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and J. Naser, Effect of recycled ratio on heat transfer performance of coal combustion in a 0.5MWth combustion test facility, in 19th Australasian Fluid Mechanics Conference (AFMC), Australia, 2014.

Dr. Mohammad Monjurul Ehsan

Shafi Noor, M Monjurul Ehsan, M S Mayeed, A K M Sadrul Islam, “Study of convective heat transfer for turbulent flow of nanofluids through corrugated channels”. ASME Proceedings of IMECE14 2014 ASME International Mechanical Engineering Congress and Exposition November 14-20, 2014, Montreal, Canada.

Dr. Mohammad Monjurul Ehsan

Shafi Noor, M Monjurul Ehsan, Sayedus Salehin, A K M Sadrul Islam, “Heat Transfer and Pumping Power Using Nanofluid in a Corrugated Tube”. 19th Australasian Fluid Mechanics Conference, Heat Transfer, 8-11 December 2014, Melbourne, Australia.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam, “Study of turbulent convective heat transfer enhancement by Al2O3 -water nanofluid through a rough circular tube”, The 7th International Meeting on Advances in Thermofluids (IMAT), 26-27 November, 2014, Malaysia.

Dr. Mohammad Monjurul Ehsan

Sayedus Salehin, M Monjurul Ehsan, Shafi Noor, A K M Sadrul Islam, “Modeling of an Optimized Hybrid Energy System for Kutubdia Island, Bangladesh”. The 7th International Meeting on Advances in Thermofluids (IMAT), 26-27 November, 2014, Malaysia.

Prof. Dr. Md. Rezwanul Karim

AA Bhuiyan, MR Amin, R Karim, A.K.M. S. Islam, Plate fin and tube heat exchanger modeling: Effects of performance parameters for turbulent flow regime, International Journal of Automotive and Mechanical Engineering (2014), Vol. 9 (1), pp. 1768-1781. DOI: http://dx.doi.org/10.15282/ijame.9.2013.25.0147 (Impact Factor: 1.3, Q3 Ranked, ISI/Scopus Indexed Journal)

Dr. A. R. M. Harunur Rashid

Rashid, A.R.M.H., Mondol, S.A.S., Shams, M.H., and Anik, A.T.M.F.S. , Design of a Three Wheeler Vehicle's Driver's Seat Considering Ergonomics, Applied Mechanics and Materials, Vol. 564, pp 94-98, 2014

Dr. Madihah Binti Haji Maharof

Maharof, M., Jamaludin, Z., Minhat, M., Ito. T., Rafan, N.A., Abdullah, L., Chiew, T.H., Jamaludin, J., and Tang, T.F. 2014, December. Modeling and Techniques of Vibration Control for a 6 Degree-of-Freedom Robot Applications. In 2014 ICPE, The 6 th International Conference on Postgraduate Education 2014 (ICPE-6 2014).

2013 (15)

Prof. Dr. M. Ahsan Habib

M. A. Habib, M. Rahman, "Analysis of Electrolyte Flow in Localized Electrochemical Deposition", 5th BSME International Conference on Thermal Engineering 2013, Dhaka, Bangladesh.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.M Tawfiq ullah (2013), “Measuring the circularity and straightness of a pipe by vision technology” Journal of Engineering, Issue: 4; page: 293-295, 2013

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Shafi Noor, Md. S.I Chowdhury (2013), “Investigation of Machinability responses during drilling operations with the applications of external magnetic field”- Proceedings of ICMIME conference; RUET; 01-03 November 2013.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, shafi Noor, Omar Farque Rassel, TMM sunny (2013), “Effect of ultrasonic sound signal on machinability control during turning operations of mild steel” presented in International conference on Control, Robotics and cybernetics”-August 17-18, Male, maldives

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S M Tawfiq Ullah, Ragib Ishraq Khan, Md. Mahfujur Rahman (2013), “Prediction and Optimization of Surface Roughness by coupled Statistical and Desirability Analysis in Drilling of mild steel” International Journal of Engineering, Issue X (2013), Volume 2.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon (2013), “Investigation of Machinability responses during magnetic field assisted turning process of preheated mild steel” Elservier procedica; 56 (2013) 713-718.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, shafi Noor, Omar Farque Rassel, TMM sunny (2013), “Effect of ultrasonic sound signal on machinability control during turning operations of mild steel”- International journal of Electrical Energy, vol:1, issue:2, June 2013, pp113-116, Engineering and Technology publishing, doi: 10.12720/ijoee.1.2.113-116.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, and AI Alam, Development of Web Based Wind Resource Assessment (WEA) Tool. Journal of Energy and Environment, vol. 3(1), 2013.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, MR Amin and AKMS Islam, Three-dimensional performance analysis of plain fin tube heat exchangers in transitional regime. Applied Thermal Engineering, vol. 50(1): p. 445-454, 2013.

2012 (44)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, (2012),“Investigation of the Effect of External Permanent Magnetic Field on Cutting temperature and Cutting Force in Turning Operation” International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, S.M Toufiqullah (2012),“Study of the effect of Electromagnetic field on tool wear and surface roughness during turning operation of mild steel” International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, Abid Bin Rashid, Ashiqur Rahman (2012),“Prediction of forming defects in deep drawing process by finite element simulation” Submitted in International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon (2012), “Investigation of Machinability responses during magnetic field assisted turning process of preheated mild steel” paper ID 155; Proceedings of 5th BSME international conference on thermal engineering, 21-23 December 2012, Dhaka, Bangladesh.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.M Tawfiq ullah, Md. S.I Chowdhury (2012), “Innovating soft computing technique for the prediction of chatter in end milling operations” accepted to mat2012, 22-25 November 2012, Turkey

Dr. Md. Anayet Ullah Patwari

AKM Nurul Amin, Mohd Dali M Ismail, Muhammad Iqbal Musa; Anayet U Patwari, “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations” Journal of Advanced Materials Research, volume: 418-420 page 1237-1241, transtech publications 2012.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, Md. H Rashid, G R Mumtaz, M N Mahmood (2012), “Experimental investigations of the effect of gating system in aluminum alloy casting process” Proceedings of 6th International conference on mechanical engineering and 14th annual meet, 28-29 September 2012

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, M N Mahmood, Md. Mahfujur Rahman, Ragib Ishraq Khan (2012), Simulation approach for dynamic characterization of a drill machine” proceedings of 6th International conference on mechanical engineering and 14th annual meet, 28-29 September 2012

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, N. A. Chowdhury, M. D. Arif, and Md. S. I. Chowdhury (2012) “Surface roughness optimization in EDM for circular copper electrode by RSM-GA approach”-Volume 10, issue:03, pp. 299-303, International Journal of Engineering, ISSN 1584-2673.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. D. Arif, M.N. Mahmood, (2012), “ An innovative application of Digital Image Processing to Analyze Tool wear in Turning Operation” Special issue of international journal of the computer, the internet and management, pp 74.1.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, N.A. Chowdhury, M. D. Arif, S.I Chowdhury (2012), “Prediction of surface roughness during EDM of mild steel using rectangular electrode by RSM” Special issue of international journal of the computer, the internet and management, pp 40.1.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin (2012), “Artificial Intelligence Model of Surface Roughness for End Milling Operation Of Steel and its verification by Genetic Algorithm” Journal of Applied Mechanics and Materials, vols 110-116, pp 3459-3464.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, S.M Toufiq Ullah, M. D. Arif, S.I Chowdhury (2012), Development of a simulator for predicting the machinability factor in end milling operations” Special issue of international journal of the computer, the internet and management, pp 24.1.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, N.M Reehan, M. D. Arif (2012), “Improvement of Machinability of Mild steel during turning operation by Magnetic Cutting”, International Journal of advanced science information technology, volume-2, No-3, pp:9-12.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. D. Arif, SM Tawfiq Ullah (2012), “Controller Design for Behaviour predictor of second order closed loop system in automated industrial processes” volume 5, issue 2, ACTA Publication, Romania.

Dr. Md. Anayet Ullah Patwari

AKM Nurul Amin, M.H Ishtiyaq, Anayet U Patwari (2012), “Enhancement of Machinability of Inconel 718 in End Milling through Online Induction Heating of Work-piece” Journal of Advanced Materials Research, volume: 415-417 page 420-423, transtech publications.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. D. Arif, Md. S. I. Chowdhury, N. A. Chowdhury (2012), “Identification of Machined surfaces using Digital Image processing” International Journal of Engineering, Issue X (2012), Volume 1, Page: 213-218.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, MR Amin, Numerical study of 3D thermal and hydraulic characteristics of wavy fin-and-tube heat exchanger. Frontiers in Heat and Mass Transfer (FHMT), vol. 3(3), 2012.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, AKMS Islam, Heat Exchanger Design: Plate fin and tube arrangement, LAMBERT Academic Publishing, ISBN-13: 978-3845474601.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, R B Hossain, S Salehin, M A Jinnah, “Development of time measuring technique to measure the shock speed during propagation in the open atmosphere”. International Journal of Advanced Science Engineering and Information Technology (IJASEIT), Malaysia. Vol. 2 (2012) No. 3. ISSN: 2088-5334. DOI: http://dx.doi.org/10.18517/ijaseit.2.3.193.230-236. (Scopus Indexed Journal). http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.970.3351&rep=rep1&type=pdf

Dr. Mohammad Monjurul Ehsan

M A Jinnah, M Monjurul Ehsan. “Numerical and Experimental Study on Wave Propagation in Open Atmosphere”. The Journal of the Institution of Engineers, Malaysia, vol. 73(3), 2012, pages 14-22. ISSN: 0126-513X. (Scopus Indexed Journal). http://103.86.130.60/xmlui/handle/123456789/28659

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Enaiyat Ghani Ovy, Kazy Fayeen Shariar, S M Ferdous. “A Novel Approach of Electrification of the High-Rise Buildings at Dhaka City during Load Shedding Hours”. International Journal of Renewable Energy Research (IJRER), Turkey. Vol. 2, no. 1 (2012): 123-130. (Scopus Indexed Journal). https://ijrer.org/ijrer/index.php/ijrer/article/view/140

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Enaiyat Ghani Ovy, H A Chowdhury, S M Ferdous. “A Proposal of Implementation of Ducted Wind Turbine Integrated with Solar System for Reliable Power Generation in Bangladesh”. International Journal of Renewable Energy Research (IJRER), Turkey. Vol. 2, no. 3 (2012): 397-403. (Scopus Indexed Journal). https://www.ijrer.org/ijrer/index.php/ijrer/article/viewFile/242/pdf

Mr. Sayedus Salehin

Ehsan, M. M., R. B. Hossain, S. Salehin, and M. A. Jinnah. "Development of Time Measuring Technique to Measure the Shock Speed during the Propagation in the Free Atmosphere" International Journal on Advanced Science, Engineering and Information Technology 2, no. 3 (2011): 34-38. ISSN: 20885334 (January 2012) [http://www.insightsociety.org/ojaseit/index.php/ijaseit/article/view/193/198]

2011 (68)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, N. A. Chowdhury, M. D. Arif, Md. S. I. Chowdhury, M. Hasan (2011), “Prediction of surface roughness during Electric discharge machining by Response surface methodology”- Paper ID:26, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), 22- 24 December 2011, Chittagong, Bangladesh

Dr. Md. Anayet Ullah Patwari

Md. Anayet U Patwari, N. A. Chowdhury, N.M Reehan, Arif M Khan (2011) “Investigation of the different mode shape and frequencies of a lathe machine by Finite Element Modal Analysis”-Paper ID:23, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), 22- 24 December 2011, Chittagong, Bangladesh

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, N.A. Chowdhury, Ikhwanul Imam, A Arefin, M.N. Mahmood (2011), “ Investigation of machinability improvement during turning operation of heat treated mild steel, Paper ID:29, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

Dr. Md. Anayet Ullah Patwari

A.K.M. Nurul Amin, Anayet U. Patwari, Dali M, Musa M.I “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to eliminate conventional finishing operations”- Abstract Accepted International conference on Mechatronics 2011, organized by Faculty of Engineering, International Islamic university of Malaysia.

Dr. Md. Anayet Ullah Patwari

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating the effect of the cross section of gating system by CFD simulation in cooling of Aluminum alloy in a permanent mould casting” Paper ID:12, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

Dr. Md. Anayet Ullah Patwari

Md. Anayet U Patwari*, M.N. Mahmood, Adib Bin Rashid, Ashikur Rahman (2011),“Computational Flow Analysis to predict the flow pattern and temperature variation inside a Vortex Tube” Paper ID:8, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

Dr. Md. Anayet Ullah Patwari

AKM Nurul Amin, Mohd Dali M Ismail, Muhammad Iqbal Musa; Anayet U Patwari, “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations” Proceedings of ICAMMP conference, December 2011, china

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, , N.M Reehan, M. D. Arif, “Improvement of Machinability of Mild steel during turning operation by Magnetic Cutting”, accepted 2nd international conference on advanced science, engineering and information technology (ICASEIT), paper Id 20; Bangi, Malaysia, 12-13 December 2011.

Dr. Md. Anayet Ullah Patwari

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating of the Effect of Rectangular and Trapezium Cross Section of Gating System by CFD Simulation in Cooling of Aluminium Alloy in a Permanent Mould Casting” accepted 2nd international conference on advanced science, engineering and information technology (ICASEIT), paper Id-14; Bangi, Malaysia, 12-13 December 2011.

Mr. Sayedus Salehin

Sayedus Salehin, Huaichen Zhang, Tomas Larriba Martinez, Giorgos Papakokkinos, Govinda Upadhyay, Eric Bowler, J.M.N. van Kasteren, “Designing of an Emergency Energy Module for relief camp situations: Case study for a Refugee camp in Chad-Sudan Border”, in the proceedings of World Congress of Sustainable Technologies WCST-2011,7-10 November 2011, London, United Kingdom. pp 9-14, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6114227]

Dr. Md. Anayet Ullah Patwari

Amin, A. K. M. Nurul and Hossain, Ishtiaq and Patwari, Muhammed Anayet Ullah (2011) Wear mechanism in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 247-253. ISBN 978-967-418-175-8.

Dr. Md. Anayet Ullah Patwari

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Hazim, A. and Adlan, Z. (2011) Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 217-223. ISBN 978-967-418-175-8.

Dr. Md. Anayet Ullah Patwari

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 201-207. ISBN 978-967-418-175-8.

Dr. Md. Anayet Ullah Patwari

Hossain, Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM university press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 155-161.

Dr. Md. Anayet Ullah Patwari

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 129-137.

Dr. Md. Anayet Ullah Patwari

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 123-129. ISBN 978-967-418-175-8

Dr. Md. Anayet Ullah Patwari

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 149-155. ISBN 978-967-418-175-8.

Dr. Md. Anayet Ullah Patwari

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2011) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics Book Series: Selected papers from ICOM’01, ICOM’05 and ICOM’08. IIUM Press, Kuala Lumpur, pp. 591-597. ISBN 9789670225685

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin, Arif M.D (2011), “Optimization of Surface Roughness in End Milling of Medium Carbon Steel Genetic Algorithm” –special issue of international journal of the computer, the internet and management (IJCIM), volume 19, Number SP1, ISSN 0858702.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, and Md. S. I. Chowdhury (2011) “3-D Contour Generation and Determination of Surface Roughness of Shaped and Horizontally Milled Plates Using Digital Image Processing”- Issue-9, Volume-3, International Journal of Engineering, Page 127-130.

Prof. Dr. Md. Rezwanul Karim

KMA Nakoa, MR Karim, SL Mahmood, MAR Akhanda, Effect of colored absorbers on the performance of a built-in-storage type solar water heater, International Journal of Renewable Energy Research (2011), Vol. 1(4), pp. 232-239. DOI: https://ijrer.com/index.php/ijrer/article/view/69 (Impact Factor: 1.3, Q3 Ranked, ISI/Scopus Indexed Journal)

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, A. Arefin, Iwanul Imam (2011), “Detection, categorization, and assessment of eye cataracts using digital image processing-special issue of international journal of the computer, the internet and management (IJCIM), volume 19, Number SP1, ISSN 0858702.

Dr. Md. Anayet Ullah Patwari

S. Alam, AKM Nurul Amin, Md. Konneh, Anayet U Patwari, “Surface roughness prediction in high speed flat end milling of ti-6al-4v and optimization by desirability function of RSM- Journal of Advances in Materials processing technology, page 1166-1173, Advance Materials Research, volume: 264-265, transtech publications 2011.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin, “Artificial Intelligence Model of Surface Roughness for End Milling Operation Of Steel and its verification by Genetic Algorithm” 2nd International Conference on Mechanical Aerospace Engineering (ICMAE 2011)- premier forum for the presentation of new advances and research results in the fields of theoretical, experimental, and applied Mechanical Aerospace Engineering, 29-31 July 2011, Thailand.

Dr. Md. Anayet Ullah Patwari

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari, AKM Hafiz, “Machinability Improvement by work-piece preheating during End Milling of AISI H13 steel” Journal of Advances in Materials processing technology, Advance Materials Research, volume: 264-265, page 894-900, transtech publications 2011.

Dr. Md. Anayet Ullah Patwari

AKM Nurul Amin, A. Fakruzi Majed, M. K. Daud, M.H Ishtiyaq, Anayet U Patwari, “Investigation of the machinability of Inconel 718 in room temperature and preheating conditions” Journal of Advances in Materials processing technology, Advance Materials Research, volume: 264-265, page 1187-1192, transtech publications 2011.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, “Statistical approach for the development of Tangential Cutting Force model in End Milling of Ti6Al4V” Journal of Advances in Materials processing technology, page 1160-1165, Advance Materials Research, volume: 264-265, transtech publications 2011.

Dr. Md. Anayet Ullah Patwari

Md. Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Marian Azhari, S. Farahain, “Chip serration frequency-the primary cause of chatter during end milling operation”, Journal of Advances in Materials processing technology, page 1174-1179, Advance Materials Research, volume: 264-265, transtech publications 2011.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury, Anayet U. Patwari (2011), “Development of a Micro-controller based controlling unit for flexible control of a Robot Structure” ACTA technica corviniensis, volume-2, issue-6, April-june issue, page 105-108.

Dr. Md. Anayet Ullah Patwari

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari “Prediction of surface roughness in high speed machining of Inconel 718, Journal of Advances in Materials processing technology, page 1193-1196, Advance Materials Research, volume: 264-265, transtech publications 2011.

Prof. Dr. Md. Rezwanul Karim

MR Karim, MAR Akhanda, Study of a hybrid photovoltaic thermal (PVT) solar systems using different ribbed surfaces opposite to absorber plate, Journal of Engineering and Technology (JET) (2011), Vol. 9 (1), ISSN 1684-4114, https://old.jet.iutoic-dhaka.edu/assets/publishedPaper/9_1_2.pdf

Dr. Md. Anayet Ullah Patwari

Md. Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, A. Arefin, Iwanul Imam (2011), “Detection, categorization, and assessment of eye cataracts using digital image processing” e-proceedings of First international conference on interdisciplinary Research and development, organized by Royal Institute of Thailand, 01 June 2011, Thailand

Dr. Md. Anayet Ullah Patwari

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating of the Effect of Rectangular and Trapezium Cross Section of Gating System by CFD Simulation in Cooling of Aluminum Alloy in a Permanent Mould Casting” International Journal of advanced science information technology, volume-2, No-3, pp:4-8.

Mr. Sayedus Salehin

S.M. Ferdous, Walid Bin Khaled, Benozir Ahmed, Sayedus Salehin, Enaiyat Ghani Ovy, “Electric Vehicle with Charging Facility in Motion using Wind Energy”, in the proceedings of World Renewable Energy Congress 2011, 8-11 May 2011, Linkoping, Sweden, pp. 3629-3636, published by Linköping University Electronic Press, Sweden [http://www.ep.liu.se/ecp/057/vol13/017/ecp57vol13_017.pdf]

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris’ “Influence of chip serration frequency on chatter formation in End milling of Ti6Al4V” ASME journal 2011. J. Manuf. Sci. Eng. -- February 2011 -- Volume 133, Issue:1, 011013 (12 pages) doi:10.1115/1.4003478.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, CFD analysis of different fin-and-tube heat exchangers. J. Mech. Eng, vol. 62(4): p. 237-249, 2011.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, MR Amin, Numerical prediction of laminar characteristics of fluid flow and heat transfer in finned-tube heat exchangers. Innovative Systems Design and Engineering, vol. 2(6): p. 1-12, 2011.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, AI Alam, Application of wind resource assessment (WEA) Tool: A case study in Kuakata, Bangladesh. International Journal of Renewable Energy Research (IJRER), vol. 1(3): p. 192-199, 2011.

Dr. Md. Zahid Hossain

M. M. Sardar, Md. Zahid Hossain, H.A. Chowdhury and E. G. Ovy, “Investigation of Vibration on Vehicle Suspension System Using Half-car-model” Trans. Tech Publications, Switzerland, Journal of Advanced Material Research, Vol. 199-200, pp. 831-835, 2011

Dr. Md. Zahid Hossain

T. Inoue, Y. Ishida, G. Fei, Md. Zahid Hossain, “Suppression of the Forward Rub in Rotating Machinery by an Asymmetrically Supported Guide, Journal of Vibration and Acoustics, Transactions of ASME, Vol. 133, pp. 021005-1 to 021005-9, 2011

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, R B Hossain, S Salehin, M A Jinnah, “Development of time measuring technique to measure the shock speed during propagation in the open atmosphere”.2nd International conference on Advanced Science Engineering and Information Technology (IJASEIT), 12-13 December, 2011, Malaysia.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Enaiyat Ghani Ovy, Kazy Fayeen Shariar, and S M Ferdous. “A Novel Approach to Provide Firm power with the integration of Pico-Hydro-turbine and wind turbine Installed at the High-Rise Building”. Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper ID-11-RE-011.

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Enaiyat Ghani Ovy, H A Chowdhury and S M Ferdous. “An Approach of Designing and implementing photovoltaic-wind power plant for reliable power generation in Bangladesh”. Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper ID-ICME11-RE-004.

2010 (51)

Dr. Md. Anayet Ullah Patwari

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari, A. Hazim, Z. Adlan “Comparison of machinability of ceramic inserts in room temperature and cryogenic cooling conditions during end milling of Inconel 718”- Proceedings of International conference of Science and Technology (ICSTIE 2010), 16-17th December 2010, Pulau Pinang, Malaysia

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M Nurul Amin, Turnad L. Ginta, “ A coupled Artificial Neural Network and Response surface methodology for the Prediction of average Surface Roughness in End milling of preheated Ti6Al4V alloy”, International Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania, TOME VIII (2010), Issue 3, Page: 190-195, ISSN-1584-2673.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq (2010) “Investigation of formation of chatter in a non-wavy surface during thread cutting and turning operations” Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86, pp 637-645, Trans Tech publication Switzerland.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2010), “Role of chip serration frequency in chatter formation during End Milling operation of stainless steel”, Journal of advanced materials research (AMR), Trans Tech publication Switzerland,vols.97-101,pp.1989-1992, doi.10.4028/www.scientific.net/AMR.97-101.1989.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari, (2010) “Improvement of surface quality using a designed ball burnishing rolling tool” Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania TOME VIII (2010), Issue 1, Page: 147-152, ISSN-1584-2665.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq “Development of a Mathematical model for the Prediction of Chip Formation Instability and its verification by Fuzzy logic with genetic algorithm”—International Journal of Machining & Machinability of Materials, Volume 8, Nos: 1/2, 2010, Special Issue on Artificial Intelligence applied in Machining, pp 38-54.

Dr. Md. Anayet Ullah Patwari

S. Alam, AKM Nurul Amin, Md. Konneh, Anayet U Patwari “Prediction and Investigation of Surface Response in High Speed End- Milling of Ti-6Al-4V and its optimization by Genetic algorithm”, Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86 (2010), pp 1009-1015, Trans Tech publication Switzerland.

Dr. Md. Anayet Ullah Patwari

A.M.K Hafiz, A.K.M.N Amin, M.A. Lajis, Anayet U. Patwari, “Prediction of Tool life and Experimental Investigation and during Hot Milling of AISI H13 Tool steel”- Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86 (2010), pp 190-197, Trans Tech publication Switzerland.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2010)“Identification Chip Serration Frequency and its Prediction model during End Milling of Medium carbon steel (S45C)-vol.3, issue 1, pp.193-200, American Journal of Applied Sciences

Dr. Md. Anayet Ullah Patwari

Arif M.D, Anayet U Patwari, N.A Chowdhury (2010),“Surface Roughness Characterization Using Digital Image Processing Technique” MED-34, 13th Annual paper meet, IEB Dhaka

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Proceedings of international multi-conference of Engineers and computer scientists 2010, Volume III, march 17-19, 2010, Hong kong.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Proceedings of IAENG International conference on Industrial Engineering, 17-19 March 2010, Hong Kong.

Dr. Md. Anayet Ullah Patwari

AKM Nurul Amin, I,H Jaffar, A. U. Patwari, W.W.D Zubaire “Role of Discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting”– IIUM Engineering Journal, Vol. 11, No.1, pp. 124-138, 2010

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Numerical analysis of thermal and hydraulic performance of fin and tube heat exchangers Vol. II, pp. 885-890, 13th Asian Congress of Fluid Mechanics(13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

Arafat Ahmed Bhuiyan, PhD

RI Zaman, AA Bhuiyan, Numerical study of 3D natural- convection in a rectangular enclosure with two heated sections on the bed surface, Vol. II pp. 784-787, 13th Asian Congress of Fluid Mechanics (13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

Arafat Ahmed Bhuiyan, PhD

M. Ahiduzzaman, AA Bhuiyan, Optimization of Design Parameter of Rice Parboiling Boiler, Vol. I, pp. 426-429, 13th Asian Congress of Fluid Mechanics (13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

Arafat Ahmed Bhuiyan, PhD

S. Shams, AA Bhuiyan, Sustainable construction: a step towards reducing CO2 emission, The 1st Built Environment Development Symposium: Real Estate and Housing Sustainability, Dammam 17-19 Zul Qaedah 1431/ 25-27 October 2010.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and A.K.M.S. Islam, A numerical investigation on heat transfer and pressure drop performance of typical wavy fin-and-tube heat exchanger, The 7th Jordanian International Mechanical Engineering Conference (JIMEC7), 27 - 29 September, Amman Jordan, 2010.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and A.K.M.S. Islam, CFD analysis of different Fin-and-Tube Heat Exchangers, 13APM, MED, IEB, Dhaka, September 25, 2010.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Wind resource assessment at Kuakata, 11th World Renewable Energy Congress and Exhibition(WRECXI), Abu Dhabi, United Arab Emirates, 2530 September 2010.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan and A.K.M.S. Islam, Performance and Social Aspect of LED based Solar system: A Case study in Bangladesh, 11th World Renewable Energy Congress and Exhibition(WRECXI), 2530 September, 2010, Abu Dhabi, United Arab Emirates.

Arafat Ahmed Bhuiyan, PhD

Karim, MR., AA Bhuiyan, Improvement of Hybrid Photovoltaic Thermal Solar Energy Systems, 11th World Renewable Energy Congress and Exhibition (WRECXI), 2530 September, 2010, Abu Dhabi, United Arab Emirates.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, "A Numerical Investigation of Fluid Flow and Heat Transfer in a Three-Dimensional Plain Fin-and-Tube Heat Exchanger", 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19-21 July 2010, Antalya, Turkey.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Wind resource assessment tool: Development and Implementation, International Conference on Advances in Renewable energy Technologies (ICARET), July 7-9, 2010, Malaysia.

2009 (40)

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2009), “Prediction of cutting forces in end milling of Medium Carbon steel by coupling the design of Experiment and response surface methodology” Vol. ME 40, No.2, December 2009, transaction of mechanical engineering division, IEB.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Dynamic Modal Analysis of Vertical Machining Centre Components” Journal of advances in acoustic and vibrations, Volume 2009, article ID 508076, doi. 10.1155/2009/508076.

Prof. Dr. M. Ahsan Habib

M. A. Habib and M. Rahman, "An evaluation of EDM electrodes by localized electrochemical deposition", 7th International Conference on Manufacturing Research (ICMR 09), 8-10 September 2009, University of Warwick, Coventry, UK.

Dr. Md. Anayet Ullah Patwari

Mahmud SL, Chowdhury NA, Patwari A U (2009) “An approach to relate and optimize metal forming process parameter by Fuzzy logic” AMSE periodical, Journal of modeling measurement and control-a general physics and electrical application, vol 82 issue page 80

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris, “Artificial Neural Network chip serration frequency model in End Milling of Medium Carbon Steel” Research Journal of Applied Sciences, volume 4 Issue 3, page: 108-112, 2009, ISBN: 1815-332X, Medwell journal.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Characterisation of dynamic behaviour of Vertical Machining Centre Components by finite element and experimental Modal Analysis” International journal of engineering systems modelling and simulations, Vol. 1, issue 4, pp. 231-241, Inder-science publications.

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Volume 2182, page: 1812-1816, Lecture Notes in Engineering and Computer Science

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris (2009) “Prediction of Chip Serration Frequency in End Milling Of Steel AISI1020 Using Response Surface Methodology’ TOME VII (2009), Volume1, Page: 89-96, International Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania, ISSN-1584-2665.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Mixed Convection and Entropy Generation characteristics inside a porous cavity with viscous dissipation effect, Paper no. IMECE2009-10883 pp. 533-542, doi: 10.1115/IMECE2009-10883 ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol.9: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B and C, ISBN: 978-0-7918-4382-6, December 2009, Florida, USA.

2008 (39)

Dr. Md. Anayet Ullah Patwari

Anayet U Patwari, A.K.M Nurul Amin, Turnad L. Ginta, M.A. Lajis, “Prediction of Surface Roughness in End milling of preheated Ti6Al4V alloy using coupled Artificial Neural Network and Response surface methodology”, Proceedings of 4th International conference of Thermal Engineering, paper ID: 023, organized by ASME-BSME, 27-29 December 2008, Dhaka, Bangladesh

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, S. Alam; “Investigations of the causes of chatter in Computer aided manufacturing process during end milling operation”-Proceedings to third international conference on Mechatronics 2008, page 416-421, organized by Faculty of Engineering, International Islamic university of Malaysia, 18-20 December 2008.

Dr. Md. Anayet Ullah Patwari

M.H Ishtiyaq, AKM Nurul Amin, Anayet U Patwari, A. Karim, “Enhancement of Machinability by work piece preheating in end milling of Ti–6Al–4V”, Journal of Achievements in Materials and manufacturing engineering, volume 31 issue 2, page: 320-326, December 2008.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, S Alam, “Development of an Artificial Neural Network model for the Prediction of the chip serration frequency in End Milling of Medium Carbon Steel”- Proceedings International conference of Curtin university of Science and Technology engineering (CUTSE 2008), Curtin university of Technology, Sarawak, Malaysia, 24-27th November 2008.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Response Surface methodological approach for the prediction of tangential Cutting Forces in End Milling of Stainless Steel”, Journal of Engineering, TOME VI (2008), Volume 3, Page: 171-178, Annals of Faculty of Engineering Hunedoara Romania 2008. ISSN-1584-2673.

Prof. Dr. M. Ahsan Habib

M. A. Habib, S. W. Gan and M. Rahman, "Fabrication of Complex Shape Electrodes by Localized Electrochemical Deposition", 8th Asia-Pacific Conference on Materials Processing (APCMP), 15-20 June 2008, Guilin - Guangzhou, China.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq Mathematical model of chip serration frequency in end milling of Inconel 718- Proceedings of ICME 2008, 21-23 May 2008, Johor Baru, paper ID 94, Malaysia

Dr. Md. Anayet Ullah Patwari

M.H Ishtiyaq, AKM Nurul Amin, Anayet U. Patwari, “Development of an artificial neural network algorithm for predicting the cutting forces in end milling of Inconel 718”-paper ID: 89, Proceedings of ICME 2008, 21-23 May 2008, Johor Bharu, Malaysia

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, S Alam, “Improvement of Surface roughness in end milling of Ti6Al4V by coupling RSM with genetic Algorithm” Journal of Advances in Materials processing technology, page 1154-1159, Advance Materials Research, volume: 264-265, transtech publications.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari, “Development of a mathematical model for Elastic Field simulation during unloading condition in Surface Burnishing Processes”, Journal of Engineering, TOME VI (2008), Page: 55-64, Annals of Faculty of Engineering Hunedoara Romania 2008.

Arafat Ahmed Bhuiyan, PhD

Arafat A. Bhuiyan, AKMS Islam, Wind Resource Assessment at Engineering Staff College, Meghnaghat, Journals of the Institutions of Engineers (JIEB), vol. Multidisciplinary: p. 90-97, 2008.

Arafat Ahmed Bhuiyan, PhD

Barna, S.F. AA Bhuiyan, Effect of Aspect ratio on Entropy generation in a microstructure filled vented cavity, Vol. II, pp-634-640,4th BSME-ASME International Conference on Thermal Engineering,27-29 December, 2008.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Effect of Inlet to Cavity Width ratio on mixed Convection in a microstructure filled vented cavity, Vol. I, pp-48-55,4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, Numerical Analysis on mixed Convection through an adiabatic enclosure filled with fluid saturated porous medium, Vol. II, pp-641-647,4th BSME-ASME International Conference on Thermal Engineering, 27-29 December,2008.

Arafat Ahmed Bhuiyan, PhD

AA Bhuiyan, A Statistical analysis of Wind data at Engineering Staff College, Meghnaghat, Vol. I, pp-2432-2437, World Renewable Energy Congress (WRECX), August, 2008.

2007 (16)

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Surface quality improvement of a machined surface using a newly designed cylindrical Surface rolling tool”- Journal of The Institute of Engineers, Bangladesh, Multidisciplinary, Vol Mul-dis 32 No. 1 December-2007.

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq Numerical analysis and verification of chip serration frequency model by coupled response surface methodology and genetic algorithm- proceedings of International conference on Metals Processing and Manufacturing Conference, 19-22 November 2007, Cairo, Egypt

Prof. Dr. M. Ahsan Habib

M. A. Habib, S. W. Gan, H. S. Lim and M. Rahman, "Fabrication of EDM Electrode by Localized Electrochemical Deposition", 2nd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), 6-9 November 2007, Gwangju, Korea.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury, Anayet U. Patwari & Farid Uddin “Development of a multi criteria and parameter Optimization tool for the Cutting Conditions for Turning process”, Volume: 2(2007), No:1, page 75-83, Journal of Mechanical and Materials Engineering, Faculty of Engineering, University of Malaya, Malaysia 2007.

Dr. Md. Anayet Ullah Patwari

Mahmud S.L N. A Chowdhury & Anayet U. Patwari, “Optimization of blank holding force in deep drawing processes by Fuzzy Logic." Journal of Engineering and Technology Vol.6 No.1, pp 29-39, Issue: January-June 2007.

2006 (9)

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Development of an Automated Process planning system for a rectangular Milling Object” International Journal of Engineering & Technology (IJET) Volume 3(3), page: 58-63, Issue: December 2006.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Simulation of the plastic field in the deformation zone of surface rolling tools under variable work hardening conditions” Journal of Engineering and Technology (JET), volume 5, June 2006.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Design and Construction of a coordinate measuring machine and computerized simulation of a measuring object with flexible means of performing accurate and fast dimensional inspection of objects” Journal of Mechanical Engineering, IEB, Volume ME 35, page: 67-76, June 2006.

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Designing and study of a Material Handling System with auto-synchronizing technique for flexible productivity control” International Journal of Engineering & Technology (IJET), volume 3 issue 1, page 7-16, June 2006

Dr. Md. Anayet Ullah Patwari

Anayet U. Patwari, N. A Chowdhury & S.L Mahmud “Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process” AMSE Journal, Page 37-46, volume 1 special issue best-of book 2006 of AMSE conferences, France.

Dr. Md. Zahid Hossain

S. Kawamura, K. Takao, H. Minamoto, Md. Zahid Hossain, “Influence of the discritizing method on the identified results in boundary value inverse analysis by the boundary element method, Journal of Japan society of mechanical engineers (JSME), Vol. 72. No. 713, pp. 24-31, 2006

2005 (8)

Dr. Md. Anayet Ullah Patwari

N. A Chowdhury & Anayet U. Patwari “Designing and Manufacturing of a low cost Automated Guided Vehicle (AGV) with flexible path design” International Journal of Engineering & Technology (IJET) volume 2 issue 2, page 25-35, December 2005.

Prof. Dr. M. Ahsan Habib

M. A. Habib, Md. Rafiqul Islam and M. Arif Hasan Mamun, "Power Generation from Tidal Energy in the Coastal Area of Bangladesh", 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September-02 October 2005, Dhaka, Bangladesh.

Dr. Md. Zahid Hossain

S. Kawamura, T. Yoshida, H. Minamoto, Md. Zahid Hossain, “Simulation of the nonlinear vibration of a string using the cellular automata based on the reflection rule, Elsevier science ltd, applied acoustics, vol. 67, pp. 93-105, 2005

2004 (6)

Dr. A. R. M. Harunur Rashid

Rashid, A., Mac Donald, B. J. , and Hashmi, M. S. J., Evaluation of the Aesthetics of Products and Integration of the Findings in a Proposed Intelligent Design System, Journal Of Materials Processing Technology, Vol 153-154, pp 380-385, 2004.

2003 (3)

2002 (12)

Dr. A. R. M. Harunur Rashid

Rashid, A., and Hashmi, M., Expert System Based Intelligent CAD/CAM: An Overview, Proceedings of 19th International Manufacturing Conference (IMC-19), Queen’s University Belfast, Northern Ireland, UK, pp 35-144, August 28-30, 2002

Dr. Md. Zahid Hossain

Md. Zahid Hossain and K. Mizutani and H. Sawai, “Chaos and Multiple Periods in Unsymmetrical Spring and Damping System with Clearance”, Journal of Sound and Vibration , Elseiver Science Ltd. Vol. 250(2), pp. 229-245, 2002.

Dr. Md. Zahid Hossain

Md. Zahid Hossain, K. Mizutani, H. Sawai and M. Kato, “Preloading Effects on Clearance Problem in Rotor-Coupling Vibration System: Experimentation and Simulation”, Journal of Chaos, Solitons and Fractals, Vol. 14, pp. 1380-1378, 2002

2001 (1)

Dr. Md. Zahid Hossain

K. Mizutani, Md. Zahid Hossain, H. Sawai, “Nonlinear Torsional Vibrations of a Shaft System with the Hysteretic and Two-staged Torsional Stiffness”, Trans. of JSME, Vol. 67, No. 658(C), pp. 60-66, 2001

2000 (7)

1999 (2)

Dr. Md. Zahid Hossain

K. Mizutani , M. Z. Hossain “Clearance and Dry Friction Study in a Nonlinear Torsional Vibration of a Rotating Machinery”, Proc. of ASME, DETC/VIB-8297, 1999

1998 (2)

1985 (1)

Undated

Dr. Mohammad Monjurul Ehsan

Adib Adnan, Shadman Mahmud, Mohammed Raihan Uddin, Anish Modi, M Monjurul Ehsan, Sayedus Salehin. “Energy, Exergy, Exergoeconomic, and environmental (4E) analyses of thermal power plants for municipal solid waste to energy application in Bangladesh”. Waste Management 134 (2021):136-148. Impact Factor -7.14, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0956053X21004311

Dr. Mohammad Monjurul Ehsan

Mohammad Masrur Hossain, Md. Sakib Hossain, Niyaz Afnan Ahmed, M Monjurul Ehsan, “Numerical Investigation of a modified Kalina cycle system for high-temperature application and genetic algorithm based optimization of the multi-phase expander’s inlet condition”, Energy and AI 6 (2021) 100117. SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546821000665

Dr. Mohammad Monjurul Ehsan

Mohammad Masrur Hossain, Niyaz Afnan Ahmed, Md Abid Shahriar, M Monjurul Ehsan, Sayedus Salehin, Chaudhary Awais Salman, “Analysis and optimization of a modified Kalina cycle system for low-grade heat utilization”, Energy Conversion and Management: X 12(2021) 100121 Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174521000465

Dr. Mohammad Monjurul Ehsan

Faruque, Md Walid, Mahdi Hafiz Nabil, Mohammed Raihan Uddin, M. Monjurul Ehsan, and Sayedus Salehin. "Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications" Energy Conversion and Management: X 14 (2022): 100207. Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174522000307

Dr. Mohammad Monjurul Ehsan

Muhammad Awais, Arafat A Bhuiyan, Sayedus Salehin, M Monjurul Ehsan, Basit Khan, Md Hamidur Rahman, “Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview”. International Journal of Thermofluids 10 (2021): 100086. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202721000240

Dr. Mohammad Monjurul Ehsan

Awais, Muhammad, Najeeb Ullah, Javaid Ahmad, Faizan Sikandar, M Monjurul Ehsan, Sayedus Salehin, and Arafat A. Bhuiyan. "Heat transfer and pressure drop performance of Nanofluid: A state-of-the-art review." International Journal of Thermofluids (2021): 100065. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202721000033

Mr. Ifat Rabbil Qudrat Ovi

A CFD model for biomass combustion in a packed bed furnace MR Karim, IRQ Ovi, J Naser AIP Conference Proceedings 1754 (1), 05002

Mr. Ifat Rabbil Qudrat Ovi

Effect of aspect ratio on convective heat transfer for flat cross section using nanofluid SR Faysal, IRQ Ovi, AKMS Islam AIP Conference Proceedings 1851 (1), 020016

Dr. Shamsuddin Ahmed

Muzalwana A. Talib, Susila Munisamy, Shamsuddin Ahmed (2011), Quality monitoring with multivariate control charts a case of an automotive stamped parts manufacturing plant submitted for a Book Chapter of a book to be published under the Department of Applied Statistics, Faculty of Econ & Admin, UM.

Dr. Shamsuddin Ahmed

M. Abdul Quader, Shamsuddin Ahmed, (2017), “Bioenergy with Carbon Capture and Storage (BECCS): Future Prospect of Carbon-Negative Technologies”, Chapter 4, Book Title: Clean Energy for Sustainable Development, Elsevier, Academic Press. pages 91-140. ISBN: 978-0-12-805423-9, DOI: http://dx.doi.org/10.1016/B978-0-12-805423-9.00004-1

Dr. Shamsuddin Ahmed

M. Abdul Quader, Shamsuddin Ahmed, Raja Ariffin Raja Ghazilla, (2016), ‘Recent progress and future trends of CO2 breakthrough iron and steelmaking technologies for CO2 mitigation’, Chapter 22, Book Title: “Ironmaking and Steelmaking Processes” 2016, Springer International Publishing, Switzerland, pages 373-388, DOI:10.1007/978-3-319-39529-6_22.

Dr. Shamsuddin Ahmed

Muzalwana A. Talib, Susila Munisamy, Shamsuddin Ahmed (2009), A Multivariate Control Chart Scheme For Quality Monitoring Of Automotive Stamping Process -An Empirical Study Of A Malaysian Plant , Chapter 7, Research Colloquium on Advances in Quality Engineering and Management in the Malaysian Automotive Industry, pages 145- 172, Business and Advanced Technology Centre, University Technology Malaysia International Campus, Kuala Lumpur, May 2009.

Dr. Shamsuddin Ahmed

Formulating and Solving Stochastic Truck and Trailer Routing Problem Authored by my PhD candidate Dr Seyedmehdi Mirmohammadsadeghi. I was the lone supervisor. LAP LAMBERT Academic Publishing (2015-07-06 ), ISBN-13: 978-3-659-75331-2, ISBN-10:3659753319; Website: https://www.lap-publishing.com/ Number of pages: 168; Category: Mechanical engineering, manufacturing technology Keywords: Meta-heuristic Algorithms, Operations Research, Vehicle Routing Problem

Dr. Mohammad Monjurul Ehsan

M Monjurul Ehsan, Muhammad Awais, Sangkyoung Lee, Sayedus Salehin, Zhiqiang Guan, Hal Gurgenci. “Potential prospects of supercritical CO2 power cycles for commercialisation: Applicability, research status, and advancement”. Renewable and Sustainable Energy Reviews 172 (2023): 113044. Impact factor-16.78, Cite Score-28.5, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S136403212200925X

Dr. Mohammad Monjurul Ehsan

Faruque, Md Walid, Yasin Khan, Mahdi Hafiz Nabil, M. Monjurul Ehsan, and Azharul Karim. "Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System." Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904923000987

Dr. Mohammad Monjurul Ehsan

Bishal, Salim Sadman, Dewan Fahim Faysal, M. Monjurul Ehsan, and Sayedus Salehin. "Performance evaluation of an integrated cooling and power system combining supercritical CO2, gas turbine, absorption refrigeration, and organic rankine cycles for waste energy recuperating system." Results in Engineering (2023): 100943. Cite Score-3.9, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590123023000701

Dr. Mohammad Monjurul Ehsan

Ahmad, Foyez, Sajjad Mahmud, M. Monjurul Ehsan, and Musfequs Salehin. "Thermo-Hydrodynamic Performance Evaluation of Double-Dimpled Corrugated Tube Using Single and Hybrid Nanofluids." International Journal of Thermofluids (2023): 100283. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723000058